Solar Contractor Insurance by State

Illinois Solar Contractor Insurance

Illinois licenses roofing contractors statewide, has not confirmed a state license or certification for the wiring or the solar work itself, names the National Electrical Code for certain commercial buildings only, and makes workers’ compensation compulsory with the insurance sold in the private sector.

A worker in a blue hard hat and an orange vest leans over a rooftop solar panel with a handheld meter and a tablet.

Illinois licenses roofing contractors statewide through the Illinois Department of Financial and Professional Regulation, and that is the only state credential this page can confirm for a solar crew. Whether a state license or certification reaches the wiring or the solar work itself is not confirmed at the state level, and neither is a state rulebook for solar sellers and installers. The National Electrical Code is named by a Capital Development Board Act section, but only as a condition of occupying certain commercial buildings, so it is not a code for every job. Workers’ compensation is compulsory for almost every employer, with the insurance sold in the private sector or the risk self-insured on the Commission’s permission.

Where a question is not confirmed, this page says so in those words and tells you whom to ask. Where a statute or an agency speaks plainly, the source’s own words are quoted, and advice is labeled as advice.

How the policies themselves work for a solar business anywhere is laid out on the solar contractor insurance page and the coverage pages it links to. This page keeps to what is particular to Illinois, whether your business does rooftop installation, runs panel cleaning and maintenance routes or takes on ground-mount and solar farm construction.

What an Illinois solar job stands on, read from the confirmed roofing license at the top down through the open questions, the program standard, the limited code statute and the crew’s comp.

A stack of layers under an Illinois solar job, read from the top down. At the top is the roofing contractor license the Department of Financial and Professional Regulation issues statewide, the only state credential confirmed for a solar crew. Beneath it sit the questions not confirmed at the state level: a state license for the wiring, a state-required installer certification, and a rulebook for solar sellers. Next is the Illinois Power Agency’s vendor standard, which binds the businesses that enroll in its incentive program and is not a state rule on installers. Below that is the Capital Development Board Act section that names the National Electrical Code as a condition of occupying new or substantially improved commercial buildings where no building code has been adopted. Under it is the city, village or county code official, to whom the Board sends every other code question. At the bottom is compulsory workers’ compensation, met through an authorized carrier in the private sector or the Commission’s permission to self-insure. No figures are shown.

A statewide roofing license, and a solar credential that is not confirmed

Illinois licenses roofing contractors statewide through the Department of Financial and Professional Regulation. Whether any state license or certification reaches the electrical work or the solar-specific work of an installation is not confirmed.

A solar contractor that roofs, or whose scope the Roofing Industry Licensing Act reaches, holds a state roofing contractor license from the Department; the rule for electrical wiring and for solar installer certification is not confirmed at the state level.

The roofing license is real and statewide. The Illinois Department of Financial and Professional Regulation issues it in limited and unlimited forms, and the Department’s own application form defines the broader kind this way:

“Unlimited Roofing License means a license made available to contractors whose roofing business is unlimited in nature and includes roofing on residential, commercial and industrial properties.”

Read what that definition covers and what it leaves unsaid. It speaks of roofing on residential, commercial and industrial properties, which is a statement about the type of building. It names no solar term, and neither does the Act’s definition of a roofing contractor. Whether the Roofing Industry Licensing Act reaches solar racking or the mounting of modules on a roof is not confirmed at the state level.

The other routes a solar crew might look for are also unconfirmed. A state electrician or electrical contractor license for the wiring and tie-in of an array is not confirmed, and neither is a state-required installer certification. That is a different statement from saying that Illinois lacks them. A page that wrote that the state has no such requirement would be guessing, and so would a page that wrote that a license exists. Cities, villages and counties run their own permit offices, and the practical answer for a given job comes from the office where the array goes up.

As advice, these habits fit a state where the answer is open:

  • Decide before the bid whether any part of your scope is roofing in the Department’s sense, and if it might be, ask the Department whether the roofing license is expected for it. Write the question and keep the reply.
  • Ask the permit office where the array goes up who may do the wiring and what it wants on file before a permit issues, rather than assuming a license held in another town travels.
  • When you subcontract the roofing or the tie-in, collect the subcontractor’s license information with its certificate of insurance, and file them together.

How a liability policy treats the roofers and electricians you subcontract, and damage your crews cause on a roof or inside a building, is set out on the general liability page.

An incentive program’s vendor rules, and no confirmed state rulebook for sellers

Whether Illinois statute or Commerce Commission rule sets its own consumer duties for solar sellers and installers is not confirmed at the state level.

The Power Agency’s Illinois Shines program sets disclosure and marketing standards for the approved vendors that enroll in it; whether a statute or rule imposes a registration, disclosure or contract duty on solar sellers and installers outside the program is not confirmed.

That finding turns on a distinction worth drawing carefully. The Illinois Power Agency is a state agency that administers the Adjustable Block Program (Illinois Shines) incentives for photovoltaic projects and approves the vendors that enroll in it. When a business enrolls as an approved vendor, it takes on the program’s marketing and disclosure standards, and a vendor found to violate them may lose its approved status. Those standards are a program standard. They are not a state rule on installers, and they bind the businesses that join rather than every business that sells or installs a system.

What the finding does not say is as important as what it does. It does not say that Illinois has a statute or a Commerce Commission rule setting registration, disclosure or contract duties for solar sellers and installers outside the program, and it does not say that Illinois lacks one. It says the question is not confirmed at the state level. This page stops where the finding stops, and a contractor should not read either a promise or an assurance into the silence.

The practical consequence falls on the person whose name is on the proposal. Without a confirmed checklist written for solar sellers, a proposal is the document a customer, or anyone the customer complains to, will read to see what you promised. As advice, build each proposal on these habits:

  • Say how the output estimate was produced and what it assumes about shading, orientation and equipment, so a shortfall can be traced to a stated assumption instead of a vague promise.
  • List every cost the customer will bear, and describe in plain words what your business does and what the customer or another party does.
  • Keep a signed copy of whatever the customer received, and a dated note of any claim a salesperson made at the door or on the phone.
  • Ask your own counsel whether a lease, a financing arrangement or a power purchase agreement in your sales model carries duties of its own, since this page does not say.

If a customer relies on an estimate that turns out wrong and nothing is damaged, the claim that follows is a professional liability question rather than a general liability claim, and that page sets out how such a policy responds.

Writing the bid when the license question has an open edge

Nothing in this section is a rule the state has adopted. It is advice for the owner who signs the bid, drawn from the places where the findings above are open.

  • Name the license behind each scope. A proposal that lists roofing, racking, wiring and interconnection paperwork as separate lines, and says who performs each, shows the reader that the business knows where its credentials start and stop.
  • Keep the permit office’s answer. Because the state’s own answer on wiring licenses is not confirmed, the local office’s reply is the authority you have for the job. A short email, saved to the job file, is the cheapest paper trail you can make.
  • Match the program to the facts. When your agent builds the policy, tell the agent who holds each license, which work is subcontracted and whether any roofing is in scope. An application built on accurate facts is easier to defend than an application corrected after a loss.
  • Treat the incentive program as a separate rulebook. If you enroll as an approved vendor, keep its standards apart from the statutes in your files, so nobody on the sales team treats a program standard as state law, or the reverse.

A national electrical code named for certain commercial buildings only

Illinois does not adopt the National Electrical Code for every building: a Capital Development Board Act section makes it a condition of occupying commercial buildings in places without a building code, and the Board’s page sends every other question to the local code official.

Electrical code requirements for a solar job come from the city, village or county where it sits, except for state-funded buildings and for new or substantially improved commercial buildings in places without a building code, where the Act’s inspection section names the National Electrical Code.

Authority: 20 ILCS 3105/10.09-1

The statute is a section of the Capital Development Board Act on certification of inspection. It begins by setting a condition on occupying a building:

“No person may occupy a newly constructed commercial building or a substantially improved commercial building in a non-building code jurisdiction until:”

The conditions that follow are listed in lettered paragraphs, and a paragraph among them names the National Electrical Code. The statute’s own words on which edition applies are these:

“the current edition or most recent preceding edition of the National Electrical Code published by the National Fire Protection Association”

Mark the limits of that statute, because they decide how far it carries for a solar crew. It applies to newly constructed commercial buildings and to substantially improved commercial buildings, and only in a jurisdiction without a building code. It is a condition of occupying the building, not a general adoption of the code for private construction. Whether any other state rule adopts the National Electrical Code for private construction is not confirmed. For that reason this page never calls it a statewide code.

The Act’s section names the code as published and adds no amendment, so on a job it reaches, the solar photovoltaic article applies as the edition prints it. As advice, if an array is part of a commercial building that is newly constructed or substantially improved, ask the owner or the local official early whether the building sits in a jurisdiction without a building code, because that answer decides whether the inspection condition is in play.

How a liability policy treats a fault in finished wiring that comes to light later is explained on the general liability page. A file holding the drawings, the equipment listings and the inspector’s sign-off helps whoever has to answer for it.

The city, village or county official who answers every other code question

The Capital Development Board publishes a page of building codes and regulations, and it is careful about how far its answers go. Its page puts the limit this way:

“The best and most accurate answers to building code questions must be answered by your city, village, or county code official.”

The same page sorts buildings by whether the place where they stand has adopted a building code. For the kinds of building that statute reaches, it says:

“Commercial buildings in jurisdictions that have not adopted a building code AND state funded buildings.”

Taken with the statute, the Board’s page draws a plain line. In a jurisdiction that has not adopted a building code, the commercial-building condition applies, and state-funded buildings are listed alongside. Everywhere else, the electrical code a solar job is held to is the code the city, village or county has adopted, and the person who can tell you which code that is its code official.

That has a use at the bid stage. Before you price a job, ask the permit office where it sits which electrical code it applies, whether it has amended the solar article, and who inspects the wiring. Write the answers on the job sheet. A crew lead who knows which edition the inspector reads from will not be surprised on the roof.

Compulsory comp with the Commission’s permission to self-insure, and a penalty-fed fund behind it

Workers’ compensation is compulsory in Illinois for almost every employer. The Workers’ Compensation Commission says an employer either buys insurance or obtains the Commission’s permission to self-insure, and that the insurance is sold in the private sector.

A solar contractor with employees carries a workers’ compensation policy from an authorized insurer, or obtains the Commission’s permission to self-insure.

Authority: 820 ILCS 305/4(a)(3)

The Commission’s Insurance page states the reach of the duty:

“Illinois law requires employers to provide workers' compensation insurance for almost everyone who is hired, injured, or whose employment is localized in Illinois.”

The Department of Insurance, which regulates the companies that write the coverage, puts the same point in a bulletin to those companies:

“The Act requires virtually all Illinois employers to insure or otherwise secure their entire workers’ compensation liability in the manner set forth by statute.”

The statute then lists the ways an employer can meet the duty. Its insurance route reads, in part:

“Insure his entire liability to pay such compensation in some insurance carrier authorized, licensed, or permitted to do such insurance business in this State.”

The Commission restates the choice in its frequently asked questions:

“Employers may either buy insurance or obtain permission to self-insure”

and it says where the insurance comes from:

“In Illinois, w.c. insurance is sold in the private sector.”

The statute’s routes also include self-insurance on the Commission’s approval, furnishing security, and another provision the Commission finds satisfactory. It creates no insurer and names no state fund among the routes. The only fund it mentions is fed by penalties, and that fund pays benefits when an employer fails to insure. It insures no employer, so it is not a place to buy a policy, and it is not a plan for a business to count on. If a crew member is hurt while the employer has no coverage, the failure is the employer’s.

For a solar business, that leaves a direct path. The policy comes from an insurer authorized to do business in Illinois, chosen in the private sector, unless the Illinois Workers’ Compensation Commission has approved the business to self-insure. The Commission’s role is workers’ compensation administration, insurance compliance and self-insurance approval, and the Illinois Department of Insurance (insurance regulator; workers’ compensation compliance division) holds the insurance side.

How roof crews, ground crews and service technicians are classified, how subcontractors are treated at audit and how a policy follows a crew that travels are policy questions rather than Illinois questions, set out on the workers’ compensation page. As advice, settle before the season who on each job is your employee, and collect a certificate from every subcontractor before its people set foot on an array. Nothing on this page reaches past Illinois’s border; for a job in a neighboring state, check that state’s rules.

The Illinois Workers’ Compensation Commission and the Department of Financial and Professional Regulation are listed below. For work at height, the federal reference is OSHA, whose Fall Prevention Campaign covers falls from ladders, scaffolds and roofs.

Roofing licenses, comp files, building reports and power vendors: who holds each

The Illinois Department of Insurance is the state’s insurance regulator; workers’ compensation compliance division. Any agency that sells you a policy, this agency among them, can be looked up on NIPR.com.

The other public bodies behind this page each hold a separate part of the picture. Each link goes to the body’s own site, and each role is given as the source states it:

Left off this list on purpose: a body that issues a solar or electrical license, because no such license is confirmed at the state level, and a state fund that sells workers’ compensation, because the statute names no such fund among its routes. In an ordinary job the offices that matter are the roofing licensing office when a roofing question comes up, the permit office and code official where the array goes up, and your insurance agent when a certificate is needed.

Reading a county list when the license and the code are not uniform

The cards below show the largest metropolitan areas with a principal city in Illinois, as the U.S. Census Bureau delineates them, and the Illinois counties inside each.

Chicago-Naperville-Elgin, IL-IN

Part of this metro lies outside Illinois; this card lists its Illinois counties only: Cook County, DuPage County, Grundy County, McHenry County, Will County, DeKalb County, Kane County, Kendall County and Lake County.

Davenport-Moline-Rock Island, IA-IL

Part of this metro lies outside Illinois; this card lists its Illinois counties only: Henry County, Mercer County and Rock Island County.

Peoria, IL

Made up of Marshall County, Peoria County, Stark County, Tazewell County and Woodford County.

Rockford, IL

Made up of Boone County and Winnebago County.

Champaign-Urbana, IL

Made up of Champaign County, Ford County and Piatt County.

Springfield, IL

Made up of Menard County and Sangamon County.

Because the code a job is held to turns on the city, village or county where it sits, a metro is a set of separate local offices rather than a uniform market. As advice, log the county and the municipality for every job you price, and do not assume that an answer good in a principal city carries to its suburbs.

Matching open questions and fixed duties to coverage lines

The findings above say where Illinois is settled and where it is not confirmed. The policies that answer for the work are the ones a solar business carries wherever it works, and each has its own page:

  • Roofing, racking, the electricians you bring in and the wiring you leave behind point to general liability, which also takes up damage to the roof or building under the array.
  • Estimates and proposals a customer relied on, in a state where the rules for solar sellers are not confirmed, point to professional liability.
  • A compulsory comp duty, with the insurance sold in the private sector, points to workers’ compensation.
  • The trucks and trailers that carry modules and racking from the yard to the job point to commercial auto.
  • Meters, lifts and stock on the way to a roof point to tools and equipment.
  • Contracts that ask for limits above the primary layer point to umbrella liability.

Which of those weigh heaviest depends on the work. When you are ready to put the pieces together for Illinois jobs, a quote request is the place to start.

Illinois: what the state sets for solar contractors, what each rule leaves open, and the coverage page that discusses it.
License to install Not confirmed at the state level
Damage to the roof, the building or a neighbor’s property from the installation work
Solar sales and installer rules Not confirmed at the state level
A design, sizing or output estimate the customer relied on that turns out wrong
Electrical code The state names the National Electrical Code in part; local codes govern the rest
A wiring or tie-in fault traced back to the work after the job is done General Liability
Workers’ compensation Required for covered employers, bought in the open market
A crew member hurt on the job Workers’ Compensation

State rules decide who may do the work and how; the policies decide who pays when something goes wrong.

  • A license, registration or certification is a requirement of the state, not insurance.
  • License to install is not confirmed at the state level on this page.
  • Solar sales and installer rules is not confirmed at the state level on this page.

A panel for Illinois in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. License to install: Not confirmed at the state level. No connector is drawn for this row. Solar sales and installer rules: Not confirmed at the state level. No connector is drawn for this row. Electrical code: The state names the National Electrical Code in part; local codes govern the rest. It leaves open a wiring or tie-in fault traced back to the work after the job is done, which General Liability answers. Workers’ compensation: Required for covered employers, bought in the open market. It leaves open a crew member hurt on the job, which Workers’ Compensation answers. Notes: A license, registration or certification is a requirement of the state, not insurance. License to install is not confirmed at the state level on this page. Solar sales and installer rules is not confirmed at the state level on this page. The conclusion reads: State rules decide who may do the work and how; the policies decide who pays when something goes wrong. No figures are shown.

Nearby states we also write

Illinois solar contractor insurance questions

Our crew only bolts racking to a roof. Does the Illinois roofing contractor license reach that work?

That is not confirmed at the state level. The Illinois Department of Financial and Professional Regulation licenses roofing contractors statewide, and the Roofing Industry Licensing Act’s definition of a roofing contractor names no solar term. Whether the Act reaches solar racking is open, so put the question to the Department in writing before the bid, and keep its reply with the job file.

Has Illinois confirmed a state electrician license or installer certification for an array?

Not at the state level. This page does not say that such a requirement exists, and it does not say that the state lacks one. Cities, villages and counties keep their own permit offices, so ask the office where the array goes up what it wants on file. Meanwhile, name on the proposal who holds whatever license the wiring needs.

If we enroll as an approved vendor in the state’s incentive program, whose rules are we following?

The Illinois Power Agency sets standards for the vendors that enroll, and those standards bind a business that joins the program. They are a program standard, not a state rule on installers, so a business outside the program is not reached by them. Read the standards before you enroll, since a violation can cost a vendor its approved status.

A commercial building sits in a town with no building code. What does an inspection before occupancy have to do with our wiring?

For a newly constructed or substantially improved commercial building in a jurisdiction without a building code, the Illinois Capital Development Board Act makes a certification of inspection a condition of occupancy, and it names the National Electrical Code. As advice, ask the owner or the local official before wiring begins whether that condition applies to the building.

Is the National Electrical Code the law for every Illinois solar job?

No. The statute names it for newly constructed or substantially improved commercial buildings in places without a building code, and for state-funded buildings the Illinois Capital Development Board lists it as well. For every other question, the Board sends you to the city, village or county code official. Ask that office which code it applies, and whether it has amended the solar article.

Where does a growing Illinois crew buy comp, and can the Commission let us carry the risk ourselves?

From an insurance carrier authorized to do business in Illinois, bought in the private sector, or by obtaining permission to self-insure from the Illinois Workers’ Compensation Commission. The statute lists other approved routes too, but the policy is the path a small solar business can price. Settle it before anyone climbs a ladder, and collect certificates from subcontractors.

If a competitor on the same roof skips comp, what pays an injured worker?

The Workers’ Compensation Act mentions a fund fed by penalties that pays benefits when an employer fails to insure. It insures no employer and is no place to buy a policy. For your own crew the answer is a policy or approved self-insurance. For a subcontractor, ask for its certificate before its people set foot on an array, because the Illinois Department of Insurance treats the duty as near-universal.

This page describes insurance for solar contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, interconnection and code requirements change; verify current requirements with the agency named before relying on them.

Get a quote for your Illinois solar contracting business

Tell us the Illinois counties where your crews work, whether you roof, wire, service or build arrays, and how your people are paid, and we will shape a program around those answers.