Solar Contractor Insurance by State

Texas Solar Contractor Insurance

Texas runs solar wiring through its electrical contractor license, registers the businesses that sell home solar systems, adopts the electrical code statewide, and leaves workers’ compensation to each private employer’s election, with duties attached to going without.

A technician in a white hard hat and dark work coveralls holds a tablet beside rows of ground-mounted solar panels.

Texas reaches solar work through its electrical license: the Texas Department of Licensing and Regulation licenses electrical contractors and electricians, and a home solar agreement that includes installation must say an electrical contractor will do it. The same department adopts the electrical code for the whole state, a residential solar sales law registers the businesses and salespeople that sell or lease home systems, and workers’ compensation is an election for a private employer rather than a requirement.

That last finding sets Texas apart, and this page starts there. Carrying coverage and going without it are each a lawful choice for a private solar contractor here, yet each comes with paperwork, and the choice resurfaces when the business applies for its electrical contractor license and again when it bids a public building contract.

The policies themselves work the same way for a solar business in any state, and the solar contractor insurance page and the coverage pages it links to explain them. What follows keeps to Texas, whether your crews handle rooftop installation, run panel cleaning and maintenance routes or work on ground-mount and solar farm construction.

Where each Texas rule meets a solar contractor’s job: the sale, the agreement, the license behind the wiring, the electrical code and the comp election behind the crew.

A top-to-bottom flow that follows a Texas solar job through the state’s rules. It begins with the sale or lease of a home system, where the solar retailer and its salespeople register with the licensing department, unless the seller is an electrical contractor selling its own systems. The agreement comes next, and the statute fixes its terms: installation by an electrical contractor, the buyer’s right to cancel, and written disclosures that include the installer’s contact information. The wiring then goes to a licensed electrical contractor, because electrical work needs a state license, while racking and roof work carry no separate state credential. The work is built to the electrical code the department adopts for the whole state, with the solar article as the adopted edition prints it and city ordinances added inside city limits. Last comes the crew on site, working under the employer’s own workers’ compensation election: coverage from a licensed insurance company or self-insurance, or notices and lost defenses for going without, with no state fund either way. No figures are shown.

Electing whether a Texas crew carries workers’ compensation

Workers’ compensation is not compulsory for most private employers in Texas. Except for public employers and as the law otherwise provides, an employer may elect to obtain coverage, from a licensed insurance company or through self-insurance. An employer that goes without it must tell the Division of Workers’ Compensation and its employees, and in an injured employee’s lawsuit it loses the defenses of contributory negligence, assumed risk and a fellow employee’s negligence.

Authority: Tex. Lab. Code §§ 406.002(a), 406.003, 406.004(a), 406.005(a), 406.033(a), (d), 406.096(a)–(b); Tex. Ins. Code §§ 2054.003, 2054.004

The Labor Code puts the rule plainly:

“Except for public employers and as otherwise provided by law, an employer may elect to obtain workers' compensation insurance coverage.”

The Texas Department of Insurance, Division of Workers’ Compensation says the same to private employers on its own pages:

“In Texas, private employers can choose to carry workers' compensation insurance coverage, but it is not required in most cases.”

Read the limits in that wording. Public employers sit outside the election, and the statute leaves room for other laws to require coverage, which is how a public building contract can still demand it, as the next section shows. For an employer that does elect coverage, the statute names where it comes from:

“An employer may obtain workers' compensation insurance coverage through a licensed insurance company or through self-insurance as provided by this subtitle.”

The Insurance Code also creates a workers’ compensation insurer by statute. Because a law created it, it is easy to mistake for a state fund, but its chapter describes a company:

“The company operates as a domestic mutual insurance company under Chapter 883”

“The company is not a state agency or executive agency or a governmental entity for any purpose.”

Texas therefore has no state workers’ compensation fund, and this page describes that insurer by what it is rather than by name. Whichever insurer writes a policy for your crew, how the coverage pays an injured worker is explained on the workers’ compensation page.

As advice, make the election on purpose rather than by default, and write down which way the business went, because the licensing department, a public owner and your own employees will each want the answer.

What going without coverage asks of a Texas employer

An employer that does not carry coverage is not left alone by the statute. It owes notice to the state:

“An employer who does not obtain workers' compensation insurance coverage shall notify the division in writing, in the time and as prescribed by commissioner rule, that the employer elects not to obtain coverage.”

It owes notice to its own people as well, whichever way it has gone:

“An employer shall notify each employee as provided by this section whether or not the employer has workers' compensation insurance coverage.”

The heavier consequence arrives if an employee is hurt and sues. In that lawsuit, defenses an employer would otherwise raise are taken off the table:

“it is not a defense that: (1) the employee was guilty of contributory negligence; (2) the employee assumed the risk of injury or death; or (3) the injury or death was caused by the negligence of a fellow employee.”

The statute does not make the employer answer for every injury. The employee still carries the burden the same section sets:

“the plaintiff must prove negligence of the employer or of an agent or servant of the employer acting within the general scope of the agent's or servant's employment.”

Public work removes the choice. A governmental entity that signs a building or construction contract must ask for this:

“A governmental entity that enters into a building or construction contract shall require the contractor to certify in writing that the contractor provides workers' compensation insurance coverage for each employee of the contractor employed on the public project.”

As advice, weigh the trade honestly. A crew that climbs roofs, carries modules up ladders and works beside live conductors can be hurt in ways that end in a lawsuit, and without coverage the business meets that suit without the defenses quoted above. If you bid public jobs, price the coverage those contracts require before the bid. How a policy responds when a crew member is hurt is set out on the workers’ compensation page.

The state electrical license that reaches an array’s wiring

Texas licenses solar installation through its electrical license. The Electricians Licensing Law bars anyone from performing or offering to perform electrical work without a license issued under it, and defines electrical work as the labor and material used in installing an electrical wiring system and the equipment attached to a building or property; the state’s residential solar law requires that the installation in a residential solar sale or lease be performed by an electrical contractor.

A solar contractor that wires arrays in Texas needs a state electrical contractor license, with the work done by licensed electricians. The state issues no general contractor or home improvement license, so racking and roof work carry no separate state credential.

Authority: Tex. Occ. Code §§ 1305.002(11), 1305.151

The licensing section of the Occupations Code is short:

“a person or business may not perform or offer to perform electrical work or residential appliance installation unless the person or business holds an appropriate license issued or recognized under this chapter.”

Its definition of electrical work is wide enough to take in an array and its connections to a building:

“means any labor or material used in installing, maintaining, or extending an electrical wiring system and the appurtenances, apparatus, or equipment used in connection with the use of electrical energy in, on, outside, or attached to a building, residence, structure, property, or premises.”

The residential solar law then names solar installation itself. Among the terms it requires in a sale or lease that includes installation at a residence is this:

“provide that the installation of the residential solar energy system will be performed by an electrical contractor;”

The Texas Department of Licensing and Regulation lists no solar installer license among the trades it regulates, and the state has no general contractor or home improvement license, so on a Texas solar job the state credential that matters is the license behind the wiring. Racking, flashing and roof work sit outside any separate state license.

The comp election from the sections above meets the license here. For a solar contractor the choice shows up at licensing: an electrical contractor applying to the Texas Department of Licensing and Regulation files proof of a workers’ compensation policy, a certificate of authority to self-insure, or a statement that it has elected not to obtain coverage. A government entity’s building or construction contract also requires the contractor, and each subcontractor, to certify coverage for every employee on the public project. The department’s application page lists the filing a business makes when it has chosen not to carry coverage:

“A statement that you have elected not to obtain workers' compensation insurance pursuant to Subchapter A, Chapter 406, Labor Code”

Some habits keep the license and the job file in step:

  • Name on each agreement the electrical contractor of record and the licensed electricians who will make the connections, so the customer and the inspector see the same names.
  • When you subcontract the electrical work, collect the subcontractor’s license details along with its certificate of insurance, and check each document before its people reach the roof.

How a liability policy treats the electricians you hire, and damage to a roof or building under the array, is covered on the general liability page.

Solar retailer registration and the electrical contractor exemption

Texas regulates the sale and lease of home solar systems under the Residential Solar Retailer Regulatory Act, Occupations Code ch. 1806. A business that has salespeople sell or lease residential solar systems must register with the Texas Department of Licensing and Regulation as a solar retailer, each salesperson registers, and every agreement that includes installation must say the system will be installed by a licensed electrical contractor.

Authority: Tex. Occ. Code §§ 1806.004, 1806.101, 1806.102, 1806.155; Tex. Bus. & Com. Code § 115.003

The registration duty falls on the business that sells and on the people who sell for it:

“A person may not employ or otherwise contract for the services of an individual to engage in residential solar retail on behalf of the person unless the person is registered as a solar retailer.”

“A person may not engage in residential solar retail for compensation unless the person:”

The law is aimed at home systems, and it defines the systems it reaches this way:

“means a solar energy system intended or designed primarily for family, personal, or household use.”

For a business that already holds the electrical license, the chapter sets out an exemption:

“the electrical contractor is exempt from the registration and insurance requirements of this chapter applicable to a solar retailer”

An electrical contractor that sells its own systems is exempt from retailer registration and its insurance requirement, but its agreements still carry the required contract terms and the buyer’s right to cancel. A separate statute, Business and Commerce Code ch. 115, requires any seller or lessor of distributed renewable generation to give a residential or small commercial customer written disclosures, including the installer’s contact information, the equipment and its cost, the fees and the warranties.

As advice, sort out which role your company plays on each sale. When your own electrical contracting business sells and installs, the exemption reaches registration and the chapter’s insurance requirement, but not the contract terms. When a separate sales company or dealer sells the system and hires you to install it, ask whether that seller is registered before your business’s name goes on its paperwork.

What a Texas solar agreement has to put in writing

The residential solar law fixes terms that an agreement must carry when the sale or lease includes installation at a residence. Among them is the installation term quoted in the license section above, which names the electrical contractor as the one who performs the installation.

A separate statute in the Business and Commerce Code carries its own disclosure duty. It is written for distributed renewable generation rather than for solar by name, yet it reaches a solar sale, because it binds the seller or lessor and asks for the installer’s details. It opens this way:

“A seller or lessor who enters into a purchase, lease, or power purchase agreement with a residential or small commercial customer for the operation of a distributed renewable generation resource shall provide to the customer in writing:”

Among the items the customer must receive:

“contact information of the salesperson and installer of the generation resource;”

That chapter reaches small commercial customers, as it uses the term, as well as households, so a job for a small commercial customer that falls outside the residential solar law can still fall inside it. As advice, keep a disclosure page in every proposal that answers each item on the statute’s list, and have the customer sign it.

The production and savings figures that win a job deserve the same care. A customer who relied on an estimate and got less is the situation the professional liability page takes up, including how a policy treats a shortfall when nothing was damaged. On the utility side, the Public Utility Commission of Texas is the utility regulator; the residential solar retailer statute directs it to develop consumer educational materials with the licensing department and the attorney general.

The wiring code at a city job and on unincorporated land

Texas adopts the National Electrical Code statewide by rule of the Texas Department of Licensing and Regulation, 16 TAC § 73.100, which the Occupations Code requires the department to update after each new edition. The adopted rule changes one section of the code, on ground-fault protection for outdoor outlets, and amends nothing in the solar photovoltaic article.

Solar wiring in Texas is built to the department’s adopted electrical code, and the solar article applies as the adopted edition prints it. Inside city limits the job must also meet the city’s electrical ordinances and any local amendments, and outside cities it must meet standards at least as strict as the state code.

Authority: 16 TAC § 73.100; Tex. Occ. Code §§ 1305.101(a)(2), 1305.201(c)–(e)

The Occupations Code tells the department to keep the state code current. When a new national edition is published, the department is to

“adopt the revised National Electrical Code as the electrical code for the state.”

The department’s rule takes in the current edition:

“Except as provided in subsection (b), effective September 1, 2026, the department adopts the 2026 National Electrical Code (NEC) as approved by the National Fire Protection Association, Inc. on September 9, 2025.”

The rule’s change to the national text concerns outdoor outlets, and nothing in it touches the solar photovoltaic article. Where the job sits still matters. Inside a city, the statute adds a local layer:

“Electrical work performed within the corporate limits of a municipality must be installed in accordance with all applicable local ordinances.”

Outside city limits, it sets a floor:

“Electrical work performed in an unincorporated area of the state must be installed in accordance with standards at least as stringent as the requirements of the state electrical code”

As advice, ask each city’s permitting office for its local amendments before the design is final, not at inspection. On county jobs, design to the state code and keep the drawings that show it.

A wiring fault traced back to finished work, and the damage it causes, falls under the completed-work side of general liability.

Texas is recorded here as a state where comp is not compulsory, and the Texas Department of Insurance, Division of Workers’ Compensation is listed below. A crew’s work at height is covered by OSHA’s Fall Prevention Campaign in a way the coverage choice does not change.

The Texas offices behind these findings

The Texas Department of Insurance is the state’s insurance regulator. Before you sign with an insurance agency, ours included, you can check its license on NIPR.com.

The other public bodies on this page, each linked to its own site, with each role as our research recorded it:

This list has no state workers’ compensation fund on it and no board for general or home improvement contractors, because Texas has neither.

The largest metropolitan areas with a Texas principal city

Each card below is a metropolitan statistical area as the U.S. Census Bureau delineates it, with the Texas counties it takes in.

Dallas-Fort Worth-Arlington, TX

Made up of Collin County, Dallas County, Denton County, Ellis County, Hunt County, Kaufman County, Rockwall County, Johnson County, Parker County, Tarrant County and Wise County.

Houston-Pasadena-The Woodlands, TX

Made up of Austin County, Brazoria County, Chambers County, Fort Bend County, Galveston County, Harris County, Liberty County, Montgomery County, San Jacinto County and Waller County.

San Antonio-New Braunfels, TX

Made up of Atascosa County, Bandera County, Bexar County, Comal County, Guadalupe County, Kendall County, Medina County and Wilson County.

Austin-Round Rock-San Marcos, TX

Made up of Bastrop County, Caldwell County, Hays County, Travis County and Williamson County.

McAllen-Edinburg-Mission, TX

Made up of Hidalgo County.

El Paso, TX

Made up of El Paso County and Hudspeth County.

The license that reaches the wiring is the state’s in each of these metros, so a crew licensed for a job in the principal city carries the same electrical credential into the suburbs. What changes from city to city is the layer of local ordinances and amendments described above. As advice, keep a note of each city’s amendments and permit steps.

Which policy line follows the comp election, the license and the written agreement

Texas rules decide who may do the work and what the paper must say. The policies decide who pays when something goes wrong, and each has its own page:

  • The electrical license, the electricians you subcontract and the roof under the array lead to general liability, which also takes up finished wiring.
  • The written disclosures and the production estimate in a proposal lead to professional liability.
  • The comp election, and the public contracts that override it, lead to workers’ compensation.
  • Trucks and trailers loaded with modules, racking and ladders lead to commercial auto.
  • Meters, lifts and materials on their way to a job lead to tools and equipment.
  • Public owners and commercial contracts that ask for limits above the primary layer lead to umbrella liability.

The weight of each line depends on the work you do, and the pages on rooftop installation, panel cleaning and maintenance and ground-mount and solar farm construction take each kind on its own terms. When the comp question is settled and you know where your crews will be working, a quote request is the next step.

Texas: what the state sets for solar contractors, what each rule leaves open, and the coverage page that discusses it.
License to install A state license reaches solar installation
Damage to the roof, the building or a neighbor’s property from the installation work General Liability
Solar sales and installer rules The state sets its own rules for solar sellers, installers or providers
A design, sizing or output estimate the customer relied on that turns out wrong Professional Liability
Electrical code The state adopts the National Electrical Code statewide
A wiring or tie-in fault traced back to the work after the job is done General Liability
Workers’ compensation Not required of every employer
A crew member hurt on the job Workers’ Compensation

State rules decide who may do the work and how; the policies decide who pays when something goes wrong.

  • A license, registration or certification is a requirement of the state, not insurance.

A panel for Texas in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. License to install: A state license reaches solar installation. It leaves open damage to the roof, the building or a neighbor’s property from the installation work, which General Liability answers. Solar sales and installer rules: The state sets its own rules for solar sellers, installers or providers. It leaves open a design, sizing or output estimate the customer relied on that turns out wrong, which Professional Liability answers. Electrical code: The state adopts the National Electrical Code statewide. It leaves open a wiring or tie-in fault traced back to the work after the job is done, which General Liability answers. Workers’ compensation: Not required of every employer. It leaves open a crew member hurt on the job, which Workers’ Compensation answers. Notes: A license, registration or certification is a requirement of the state, not insurance. The conclusion reads: State rules decide who may do the work and how; the policies decide who pays when something goes wrong. No figures are shown.

Nearby states we also write

Texas solar contractor insurance questions

Is a Texas solar business required by law to carry workers’ compensation?

Not as a general rule. A private employer may elect to carry it, through a licensed insurance company or by self-insuring, or may elect to go without. Going without carries duties: written notice to the Texas Department of Insurance, Division of Workers’ Compensation and notice to each employee, and in an injured employee’s lawsuit the business loses the contributory negligence, assumed risk and fellow employee defenses. A public building contract requires coverage regardless.

We decided not to carry workers’ compensation. What paperwork follows from that choice?

Notify the Texas Department of Insurance, Division of Workers’ Compensation in writing that you have elected not to carry coverage, in the time and manner its rules set, and tell each employee whether the business has coverage. When you apply for the electrical contractor license, the Texas Department of Licensing and Regulation accepts a statement of that election as your workers’ compensation filing. Keep copies of every notice and filing together in the license file.

Our company holds the electrical contractor license and our own staff sell the systems. Do we register as a solar retailer?

The residential solar law exempts an electrical contractor in that position from the registration and insurance requirements it sets for solar retailers. The exemption stops short of the contract terms: your agreements must still say an electrical contractor will perform the installation, and the buyer keeps the right to cancel. If another company sells the system and you only install it, ask whether that seller is registered.

Can our racking crew work on a Texas roof without electrical licenses?

Texas issues no general contractor or home improvement license, so racking and roof work carry no separate state credential. The wiring is another matter: electrical work needs a license issued under the Occupations Code, and its definition of electrical work takes in equipment attached to a building. Plan each job so licensed electricians handle every connection, and check whether the city adds requirements of its own.

Which wiring rules apply inside city limits, and which apply when the job is out in the county?

The electrical code the Texas Department of Licensing and Regulation adopts applies statewide, with the solar article as the adopted edition prints it. Inside a city’s corporate limits the work must also follow the city’s applicable ordinances, which can include local amendments. In an unincorporated area the work must meet standards at least as stringent as the state code. Ask each city’s permitting office for its amendments before you design.

What written disclosures does a Texas solar customer have to receive from us?

A seller or lessor of distributed renewable generation owes a residential or small commercial customer written disclosures under the Business and Commerce Code, among them the salesperson’s and installer’s contact information, the equipment and its cost, the fees and the warranties. Where a home sale or lease includes installation, the residential solar law adds required contract terms. Keep a signed copy with every job file.

We are bidding a project for a school district or a city. What will the owner require on workers’ compensation?

A governmental entity that enters into a building or construction contract must require the contractor to certify in writing that it covers each of its employees on the public project, and subcontractors certify as well. A business that has elected not to carry coverage therefore needs it for that work. Talk with your agent before the bid goes in, so the coverage is in place when the certificate is requested.

This page describes insurance for solar contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, interconnection and code requirements change; verify current requirements with the agency named before relying on them.

Get a quote for your Texas solar contracting business

Tell us whether your Texas crews carry workers’ compensation today, which metros you work in and whether you sell your own systems, and we will build the program from those answers.