Solar Contractor Insurance by State

Arkansas Solar Contractor Insurance

Arkansas puts solar systems on its contractor specialty lists, licenses the wiring through a separate electrical board, makes a solar seller show a license, permits, a bond and insurance to net-metering customers, and requires workers’ compensation of covered employers.

A technician in a white hard hat and dark work coveralls holds a tablet beside rows of ground-mounted solar panels.

Arkansas’s contractor licensing rules carry solar systems on their lists of specialties, in the commercial rules and in the residential ones, so solar work is licensed by the Arkansas Contractors Licensing Board for commercial jobs and the Residential Contractors Committee for homes, while the Board of Electrical Examiners of the State of Arkansas licenses the people who do the wiring. That wiring is built to the National Electrical Code as the electrical board adopts it, a customer protections act for net-metering customers sets what a solar seller must put in a proposal and show before it does business, and workers’ compensation is compulsory for the employers the law covers, met with a policy or state-approved self-insurance.

The specialty is a subclassification of the contractor licenses rather than a license of its own, the electrical statute never uses the word solar, and the customer protections act reaches solar through its definition of a net-metering facility. The sections below take each finding in turn, with the source’s own words where they matter and advice for the owner.

For how the policies themselves work, start with the solar contractor insurance page and the coverage pages it links to. This page keeps to what is particular to Arkansas jobs, whether your crews do rooftop installation, service arrays on panel cleaning and maintenance routes or build ground-mount and solar farm construction projects.

An Arkansas solar seller’s written proposal at the center, joined to the license it shows, the safety demonstration and complaint notice it carries, the customers it protects, and the wiring, code and comp behind the job.

A relationship diagram with an Arkansas solar seller’s written proposal to a net-metering customer at the center. From the proposal, labeled lines run to each state rule it meets: the seller shows an applicable contractor’s license from the contractors licensing board, whose rules list solar systems as a specialty; it demonstrates that the system meets the applicable safety requirements; it carries notice that the customer may complain to the Attorney General, who enforces the act under the Deceptive Trade Practices Act; it protects residential customers and nonresidential customers of electric utilities alike; the wiring is done by electricians licensed by the electrical examiners board under a statute that never names solar; the work is built to the National Electrical Code as that board adopts it, with no change to the solar photovoltaic article; and the crew is covered by compulsory workers’ compensation, met with an insurance policy or state-approved self-insurance, with proof of coverage kept for the licensing board. No figures are shown.

Where the contractor rules list solar systems as a specialty

Arkansas licenses solar installation statewide through the Contractors Licensing Board, whose commercial and residential rules each list «Solar systems» as a specialty, and through the Board of Electrical Examiners for the wiring. The state’s solar customer-protection law also requires a solar seller to hold an applicable contractor’s license from the Board before it conducts business.

A solar contractor in Arkansas holds a Contractors Licensing Board license carrying the solar systems specialty, or the building classification that includes it, for commercial work above the cost line the law sets, or a Residential Contractors Committee license for work on existing homes above its own lower cost line. The people doing the wiring hold Board of Electrical Examiners licenses, and a firm that sells or leases a solar system shows the customer an applicable contractor’s license before it signs.

Authority: Ark. Code Ann. § 17-25-101; § 17-25-103; § 17-25-505; § 17-25-513; § 4-88-1103(3)(B)(iii); § 17-28-101(5); § 17-28-304; 17 CAR § 255-208; 17 CAR § 255-304; 17 CAR § 255-308; 17 CAR § 295-110; 17 CAR § 295-111

The commercial contractors’ rules explain how a specialty comes to sit on a license:

“A contractor may obtain any subclassification as a specialty by request and proper qualifications shown.”

The list of specialty subclassifications that follows includes solar systems:

“(105) Solar systems;”

The residential rules list the same item among their specialty classifications, for work on homes:

“(EE) Solar systems;”

A specialty is also a limit on what the license holder may do:

“A contractor licensed as a specialty (S) is authorized to only perform the functions of the specific specialty for which a license is held.”

As advice, read the scope of a job against the specialty before you sign it. A solar systems specialty fits an array; new structure for a ground-mount, a roof replaced before the modules go on or trenching for a long cable run may belong to a different classification, held by you or by a subcontractor. Ask the Arkansas Contractors Licensing Board which classification covers each added piece of work, and keep its answer in writing.

How a liability policy treats the roofers and other trades you subcontract, and damage your crews cause to a roof or building, is set out on the general liability page.

Electricians licensed by their own board, under a statute silent on solar

The wiring side of an array runs through a different body. The Board of Electrical Examiners of the State of Arkansas licenses electricians, adopts the state electrical code and sets the standards for electrical work. Its statute draws the line this way:

“No person shall perform electrical work in this state”

The statute then defines the work it covers:

“Installations of electric conductors and equipment within or on public and private buildings or other structures”

Neither the statute nor the Board’s rules use the words solar or photovoltaic. An array’s wiring comes under the license through that definition of electrical work. A contractor license that carries the electrical classification must keep a full-time master electrician, and that classification’s own list does not name solar systems. The Board licenses master, journeyman, residential master and residential journeyman electricians among its classes, and it registers apprentices.

  • Decide before the bid who on the job holds the electrical license, your own master electrician or a licensed subcontractor, and name that person in the proposal.
  • When you subcontract the tie-in, ask the electrician for the license along with the certificate of insurance.
  • Ask the Board which class a given task on your array calls for, so the people hanging conductors hold the class the work needs.

What the customer protections act asks of a solar seller, from proposal to license

Arkansas’s Customer Protections for Net-metering Customers Act, Ark. Code Ann. § 4-88-1101 and following, binds anyone who sells or leases a net-metering facility, which includes solar, or provides a net-metering service. The seller gives the customer time to evaluate a written proposal that lists the system, cost, payment schedule, savings and warranties, demonstrates that the system meets safety standards, and shows that it holds its permits and an applicable contractor’s license. The Attorney General enforces it under the Deceptive Trade Practices Act.

A solar seller or lessor in Arkansas puts the proposal in writing with the contents the Act lists, including notice that the customer may complain to the Attorney General, offers an energy efficiency audit or says how to obtain an audit, and holds the permits, bond, liability insurance and contractor’s license the Act requires before it conducts business. The Act reaches residential customers and nonresidential customers of electric utilities alike.

Authority: Ark. Code Ann. § 4-88-1101 through § 4-88-1104 (Acts 2023, No. 278, § 2, as amended by Acts 2023, No. 476)

The act is written for net metering rather than for solar by name, and it reaches solar through its definition of a net-metering facility:

“Uses solar, wind, hydroelectric, geothermal, or biomass resources to generate electricity”

The same definition speaks to residential customers and to nonresidential customers of electric utilities, so the protections are not limited to households:

“For a residential customer for residential use”

“For nonresidential customers of electric utilities for nonresidential use”

The written proposal opens the sale, and the act introduces its contents this way:

“The proposal to the prospective or existing net-metering customer shall include:”

Among the entries on that list is a notice about the Attorney General:

“Notice that the prospective or existing net-metering customer may file a complaint with the Attorney General”

The seller must also show the customer that the system meets the safety rules:

“Demonstration to the prospective or existing net-metering customer that the proposed net-metering facility meets all applicable safety requirements and standards”

Then comes the seller’s own standing. Before it conducts business, the seller holds the permits, a bond and liability insurance the act requires, and the contractor’s license item reads:

“An applicable contractor's license issued by the Contractors Licensing Board obtained prior to conducting business.”

That is the license described above: the Board that lists solar systems among its specialties is the body the act names. Enforcement sits with the Office of the Attorney General, which enforces the net-metering customer protections under the Deceptive Trade Practices Act and receives complaints about solar sellers. The enforcement section reads:

“Any violation of this subchapter may be enforced under the powers of the office of the Attorney General under the Arkansas Deceptive Trade Practices Act”

As advice, build the proposal as a template that carries each item the act lists:

  • Put the system, its cost, the payment schedule, the savings and the warranties in the document the customer signs, and attach the complaint notice and the audit offer. The estimate of savings is the line a dispute starts from, and the professional liability page sets out how a policy treats a shortfall claim where nothing was damaged.
  • Keep the permits, the license, the bond and the certificate of liability insurance together in a file you can show a customer before the contract is signed.
  • Use the same template for a business buyer. The act reaches nonresidential customers of electric utilities.

The national electrical code as the electrical board adopts it

Arkansas adopts the National Electrical Code statewide through the Board of Electrical Examiners’ rule 17 CAR § 210-401, which names the adopted edition as the standard for electrical work. The rule amends no part of the code’s solar photovoltaic article.

Solar wiring in Arkansas is built to the National Electrical Code as the Board of Electrical Examiners adopts it, with the Board’s stated exceptions for dwelling-unit circuits, and the Board says the statewide standards give a uniform minimum for electrical work.

Authority: 17 CAR § 210-401

The adopting rule takes the national code in by reference. Its adoption subsection names the code and its edition:

“The Board of Electrical Examiners of the State of Arkansas hereby adopts and incorporates herein the National Electrical Code, 2026 edition of the National Fire Protection Association.”

The provision that follows says what the adopted code governs:

“shall be the standard for the construction, installation, repair, and maintenance of electrical facilities and the performance of electrical work.”

The rule describes the aim of the statewide standard:

“The statewide standards shall guarantee a uniform minimum standard for the construction, installation, and maintenance of electrical facilities and for the performance of electrical work.”

It also says what the adopted code does not carry in on its own:

“This part does not include any later amendments or editions of the standards incorporated by reference.”

As the finding above records, the rule amends no part of the code’s solar photovoltaic article, so that article applies as the adopted edition prints it. As advice, make sure each crew lead knows which edition the inspector is reading from and which of the Board’s stated exceptions for dwelling units touch the job. When a design leans on a provision from a different edition, settle it with the permitting office before the plans are final.

How a liability policy treats a fault in completed wiring that comes to light later is explained on the general liability page.

Proof of coverage as a condition of the contractor license

Workers’ compensation is compulsory in Arkansas for the employers its law covers, and building work is reached at a smaller crew size than other employment. An employer buys a workers’ compensation insurance policy or receives state approval to self-insure, and the Contractors Licensing Board asks a contractor for proof of coverage before it issues or renews a license.

A solar contractor with employees carries a workers’ compensation policy from an insurer or qualifies with the Workers’ Compensation Commission to self-insure, and keeps proof of coverage on file with the Contractors Licensing Board.

Authority: Ark. Code Ann. § 11-9-102; § 11-9-402; § 11-9-404; § 17-25-316

The Arkansas Workers’ Compensation Commission states the reach of the requirement and the routes to meeting it on its basic facts page:

“Most employers in Arkansas with three or more employees are required by law to have Workers’ Compensation insurance coverage for their employees.”

“The coverage is provided through a Workers’ Compensation insurance policy or by the employer receiving state approval to be self-insured for such purposes.”

The licensing side adds its own check, published with the contractors’ law:

“The board shall require proof of current workers’ compensation coverage before issuing or renewing a license or registration”

The Commission names a policy and state approval to self-insure as the routes, and a state fund for private employers is not among them. For a solar business that leaves a direct path: a policy from an insurer, chosen in the open market, or the Commission’s approval to carry the risk itself, with proof of coverage on file with the licensing board before the license issues or renews.

How roof crews, ground crews and service technicians are classified, how subcontractors are treated at audit and how a policy follows a crew that travels are policy questions rather than Arkansas questions, set out on the workers’ compensation page. As advice, settle before the season who on each job is your employee, and collect a certificate from every subcontractor before its people set foot on an array. Nothing on this page reaches past Arkansas’s border; for work in a neighboring state, check that state’s rules.

Arkansas licenses solar through a specialty license, and its comp is compulsory with no named state fund. Whatever the license and the policy say, a crew’s work at height is also the subject of OSHA’s guidance on preventing falls, a three-part ask of employers: plan, equip, train.

The department, its boards and the offices that enforce

The Arkansas Department of Labor and Licensing houses the contractor, electrical and workers’ compensation bodies below and publishes their laws, rules and forms. Any insurance agency that quotes your program, ours among them, can be looked up on NIPR.com.

The other public bodies behind this page each hold a separate part of the picture. Each link goes to the body’s own site:

In an ordinary week the offices that matter are the board that issues the contractor license, the board that licenses the wiring and the commission that holds your coverage file. The Attorney General matters when a customer complains about a proposal.

Arkansas counties inside each metro, including a metro centered over the border

The cards below show metropolitan areas with an Arkansas county, as the U.S. Census Bureau delineates them: those with a principal city in Arkansas, then a cross-border metro whose principal city lies outside the state, each with the Arkansas counties inside it.

Little Rock-North Little Rock-Conway, AR

Made up of Faulkner County, Grant County, Lonoke County, Perry County, Pulaski County and Saline County.

Fayetteville-Springdale-Rogers, AR

Made up of Benton County, Madison County and Washington County.

Fort Smith, AR-OK

Part of this metro lies outside Arkansas; this card lists its Arkansas counties only: Crawford County and Sebastian County.

Jonesboro, AR

Made up of Craighead County and Poinsett County.

Hot Springs, AR

Made up of Garland County.

Memphis, TN-MS-AR

Part of this metro lies outside Arkansas; this card lists its Arkansas counties only: Crittenden County.

The contractor license, the electrical license and the electrical code all come from state bodies, so the useful local question for a metro is where the permit is pulled. As advice, log the county and the city for every job you price, keep the permit file with the licenses you showed the customer, and treat a job on the Arkansas side of a cross-border metro as an Arkansas job for the purposes of this page.

What the requirements leave for insurance to answer

A license, a customer act, a code and a comp rule say what a solar business must hold or show. They do not pay a claim. The policies a solar business carries wherever it works each have a page:

  • The contractor license and the electricians you bring in point to general liability, which also takes up finished wiring and damage to the roof or building under the array, and to the liability insurance the act asks a seller to show.
  • The proposal’s savings estimate and design point to professional liability, for estimates a customer relied on.
  • The compulsory comp law and the licensing board’s proof of coverage point to workers’ compensation, bought from an insurer.
  • Trucks and trailers that carry modules and racking between the yard and the job point to commercial auto.
  • Your own gear on the way to the roof points to tools and equipment.
  • Contracts that ask for limits above the primary layer point to umbrella liability.

Which of those weigh heaviest depends on the work, and the pages on rooftop installation, panel cleaning and maintenance and ground-mount and solar farm construction take each kind of work on its own terms. When you are ready to put the pieces together for Arkansas jobs, a quote request is the place to start.

Arkansas: what the state sets for solar contractors, what each rule leaves open, and the coverage page that discusses it.
License to install A state license reaches solar installation
Damage to the roof, the building or a neighbor’s property from the installation work General Liability
Solar sales and installer rules The state sets its own rules for solar sellers, installers or providers
A design, sizing or output estimate the customer relied on that turns out wrong Professional Liability
Electrical code The state adopts the National Electrical Code statewide
A wiring or tie-in fault traced back to the work after the job is done General Liability
Workers’ compensation Required for covered employers, bought in the open market
A crew member hurt on the job Workers’ Compensation

State rules decide who may do the work and how; the policies decide who pays when something goes wrong.

  • A license, registration or certification is a requirement of the state, not insurance.

A panel for Arkansas in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. License to install: A state license reaches solar installation. It leaves open damage to the roof, the building or a neighbor’s property from the installation work, which General Liability answers. Solar sales and installer rules: The state sets its own rules for solar sellers, installers or providers. It leaves open a design, sizing or output estimate the customer relied on that turns out wrong, which Professional Liability answers. Electrical code: The state adopts the National Electrical Code statewide. It leaves open a wiring or tie-in fault traced back to the work after the job is done, which General Liability answers. Workers’ compensation: Required for covered employers, bought in the open market. It leaves open a crew member hurt on the job, which Workers’ Compensation answers. Notes: A license, registration or certification is a requirement of the state, not insurance. The conclusion reads: State rules decide who may do the work and how; the policies decide who pays when something goes wrong. No figures are shown.

Arkansas solar contractor insurance questions

We build only for businesses and never for households. Does the solar systems specialty still matter to us?

Yes. The Arkansas Contractors Licensing Board lists solar systems among the specialty subclassifications in its commercial rules, and a contractor licensed in a specialty is authorized to perform only the functions of that specialty. The license is required above a cost line the law sets. As advice, read each job’s scope against the specialty on your license before you sign, and ask the Board about any work that goes beyond it.

Our racking crew never lands a conductor. Do those workers need electrical licenses?

The Board of Electrical Examiners of the State of Arkansas licenses electrical work, which the statute defines as installing conductors and equipment within or on buildings and other structures, and it bars anyone from doing that work without a license unless an exemption applies. The statute never uses the word solar, so ask the Board which tasks on your jobs it counts as electrical work and who must supervise them, and keep its answer in writing.

We install systems that another company sells. Does the customer protections act still reach us?

The act binds anyone who sells or leases a net-metering facility or provides a net-metering service to a net-metering customer, and its license, permit, bond and insurance showings come before that seller conducts business. An installer working under such a seller should ask which of those roles the arrangement gives it and write the answer into the contract, so each side knows who carries which duty.

What has to be in the written proposal to a net-metering customer?

The proposal lists the system, its cost, the payment schedule, the savings and the warranties, and it carries notice that the customer may file a complaint with the Office of the Attorney General. The seller also offers an energy efficiency audit or says how to obtain an audit, gives the customer time to evaluate the proposal, and demonstrates that the system meets the applicable safety requirements and standards.

Who enforces the act, and under what law?

The Office of the Attorney General enforces it, using the powers it holds under the Arkansas Deceptive Trade Practices Act, and it receives customer complaints about solar sellers. The act reaches residential customers and nonresidential customers of electric utilities alike, so a business buyer is covered too. As advice, keep the signed proposal, the permit file and the license and insurance papers you showed together with the customer’s contract.

What electrical code edition does an Arkansas inspector apply to our solar wiring?

The National Electrical Code as the Board of Electrical Examiners of the State of Arkansas adopts it by rule, which makes it the standard for electrical work across the state, with the Board’s stated exceptions for dwelling-unit circuits. The rule amends no part of the solar photovoltaic article, and it does not carry later amendments or editions into itself. Ask the permitting office which edition applies to your permit before the design is final.

Can we buy workers’ compensation from a state fund?

The Arkansas Workers’ Compensation Commission describes a workers’ compensation insurance policy or state approval to self-insure as the routes, and a state fund for private employers is not among them. A covered employer buys the policy from an insurer, or qualifies with the Commission to self-insure. The Arkansas Contractors Licensing Board also asks for proof of current coverage before it issues or renews a contractor license, so settle coverage before you apply.

This page describes insurance for solar contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, interconnection and code requirements change; verify current requirements with the agency named before relying on them.

Get a quote for your Arkansas solar contracting business

Tell us which contractor license your business holds, whether you sell to net-metering customers or only install, and how your crew is paid, and we will build a program around those answers.