Solar Contractor Insurance by State
Utah Solar Contractor Insurance
Utah licenses solar installation through a classification whose rule leaves the wiring to the electrical contractor licenses, registers the retailers who sell to households, adopts its electrical code by statute, and makes workers’ compensation compulsory with no state fund.
Utah licenses solar installation through the Division of Professional Licensing, and the rule behind its solar photovoltaic classification covers installing the modules and related components while excluding any wiring, connections and wire methods, which go to the electrical contractor licenses. The wiring is built to the National Electrical Code as the Legislature adopts it by statute, not by agency rule. A business that sells solar to households registers with the Division of Consumer Protection and gives each customer a disclosure statement that names the installer and its contractor license, and workers’ compensation is compulsory for covered employers, bought from an authorized insurer or self-insured with the Utah Labor Commission’s approval, with no state fund.
The split between the modules and the wiring runs through every section below. A crew that mounts and connects modules answers to the solar classification for the mounting and to an electrical license for the connecting, and the sale to a household brings duties of its own. The sections that follow take each finding in turn, with the source’s own words where they matter and advice for the owner.
How the policies themselves work for a solar business anywhere is laid out on the solar contractor insurance page and the coverage pages it links to. This page keeps to what is particular to Utah, whether your business does rooftop installation, runs panel cleaning and maintenance routes or takes on ground-mount and solar farm construction.
A waterfall in which each step takes what the step above leaves out or hands on. At the top, the solar photovoltaic classification covers installing the modules and related components. Below it, the wiring, connections and wire methods that classification excludes pass to the electrical contractor licenses. Below that, the wiring is built to the National Electrical Code that the Legislature adopts by statute, not by agency rule. Next, a sale to a household passes to the retailer registration with the Division of Consumer Protection, and the retailer repairs a residential system that underproduces its good-faith estimate. At the bottom, the crew’s pay rests on compulsory workers’ compensation, met through an authorized insurer or the Labor Commission’s approval to self-insure, with no state fund. No figures are shown.
A solar classification that stops short of the wiring
Utah licenses solar installation through the Division of Professional Licensing. The Utah Construction Trades Licensing Act requires a contractor license for the trades it covers, and the Division’s contractor application lists a Solar Photovoltaic Contractor among the specialty classifications, next to the general and residential electrical contractor licenses that cover electrical wiring work.
A solar contractor in Utah holds a contractor license from the Division of Professional Licensing in the classification that fits the work: the Solar Photovoltaic Contractor specialty classification for photovoltaic installation, with the licensing rule excluding any wiring, connections and wire methods from that classification’s scope and reserving them to the electrical contractor licenses. The state license and the business license of the city where the contractor has its principal place of business are the only licenses the Act lets the state or a local government require of a licensee.
Authority: Utah Code § 58-55-301(1)–(2); § 58-55-102(27), (44), (53); § 58-55-305(1)(o); Utah Administrative Code R156-55a
The Construction Trades Licensing Act puts the duty to hold a license on the people who practice the trades it covers, who
“shall become licensed under this chapter before engaging in that trade or contracting activity in this state”
The Act does not describe the solar work itself. It defines a specialty contractor by pointing to the rules: a specialty contractor is
“a person licensed under this chapter under a specialty contractor classification established by rule”
The Division of Professional Licensing publishes a contractor application that lists the classifications. In its list of specialty trade classifications, the solar entry reads:
“S202 Solar Photovoltaic Contractor”
The scope of that classification is printed in the licensing rule, which says of a licensee under it:
“A licensee under this subsection may fabricate, construct, install, or replace photovoltaic modules and related components.”
The next subsection of the rule limits that scope, and the limit matters to any crew that finishes its own jobs:
“The scope described in Subsection 301ak(1) excludes any wiring, connections, and wire methods as governed in the National Electrical Code and Subsection R156-55b-102(1).”
Read together, the passages divide a solar job. Fabricating, constructing, installing or replacing the photovoltaic modules and their related components falls inside the solar classification. Wiring, connections and wire methods fall outside it, and the rule ties them to the National Electrical Code. A contractor that holds only the solar classification has not been licensed to do the connections.
As advice, take the exclusion at its word when you divide a crew’s work. If a task could be read either way, ask the Division of Professional Licensing before the bid, and keep the answer in the job file with the license numbers of everybody who will touch the system.
The electrical contractor licenses that take the connections
The Division issues the general electrical contractor license and the residential electrical contractor license under the same Act as the solar classification, and the exclusion above sends wiring work to them. The rule for the general electrical contractor license adds a reach of its own:
“a licensee holding an E200 General Electrical Contractor license may additionally perform all work within the scope of work under the following licenses:”
The list that follows that sentence includes the solar classification. In plain terms, a business that holds the general electrical contractor license can do the solar classification’s work as well as the wiring, while a business that holds only the solar classification cannot do the wiring. The licenses are not symmetrical, and that is worth knowing before you decide who is on your payroll and who is a subcontractor.
The Act also limits what a local government may ask of a licensee: the state license and the business license of the city where the contractor has its principal place of business are the only licenses the Act lets the state or a local government require. As advice, still ask the permit office where each job sits what it wants on file before a permit issues.
Where the work divides between the solar classification and the electrical licenses, careful paperwork helps:
- Write into each subcontract which party lands the conductors and which license that party holds, so the proposal and the subcontract name the same firm.
- When you subcontract the connections, ask the electrical contractor for its license classification along with its certificate of insurance, and keep the license and the certificate in the job file.
How a liability policy treats the electrical contractors you hire, and damage your crews cause on a roof or in a building, is set out on the general liability page.
Who must register, and what the separate disclosure statement names
Utah’s Residential Solar Energy Consumer Protection Act, Utah Code Title 13 Chapter 52, regulates solar retailers that sell or finance residential solar energy systems. It requires the retailer to register with the Division of Consumer Protection and post a bond or deposit, to hand the customer a separate paper disclosure statement that names the installer and the installer’s state contractor license, to give a signed copy of the agreement before installation begins, and to repair a system that underproduces its good-faith estimate.
The Act binds the solar retailer: the business that sells a residential system under a purchase agreement, owns a leased system, or sells power under a power purchase agreement. A solar contractor that sells to homeowners registers as a solar retailer, uses only sales representatives who are its employees, names the licensed installer on the disclosure statement, and cannot start installation until the Act’s waiting period after the signed agreement reaches the customer. Systems that are not residential, a lender that only finances, and agreements under the Act’s minimum term are outside it.
Authority: Utah Code § 13-52-102; § 13-52-103; § 13-52-201; § 13-52-202; § 13-52-206; § 13-52-207; § 13-52-302; § 13-52-401; § 13-52-501
The Act is written around the retailer. Its definition of a solar retailer begins with the business that
“sells or proposes to sell a residential solar energy system to a customer under a system purchase agreement”
The definition goes on to reach the owner of a leased system and the seller of power under a power purchase agreement. What makes a system residential is spelled out too, and the Act’s own definition says such a system
“generates electricity primarily for on-site consumption for personal, family, or household purposes”
That is the edge of the Act, and it is a clear line for a contractor. The Division of Consumer Protection registers solar retailers and enforces the Residential Solar Energy Consumer Protection Act. A business that builds arrays on commercial roofs or open ground and sells to no household stays outside it, and a business that does household and non-household work has separate paperwork to keep apart.
The disclosure is where the Act weighs heaviest on a proposal. Its opening line on the subject reads:
“At the time of entering a solar agreement, a solar retailer shall provide to a potential customer a separate, written disclosure statement”
The contents are set out in the sections that follow, and an item among them reaches straight to the installer’s paperwork. The statement must carry
“the name, address, telephone number, email address, and state contractor license number of the person who is expected to install the system that is the subject of the solar agreement”
The installer is named on a retailer’s disclosure with its state contractor license, which ties the consumer chapter to the licensing findings above: the license number printed on that page has to be the license that fits the work. The Act sets a further rule that bears on staffing:
“A sales representative shall be an employee of the solar retailer.”
The Act also binds a retailer to repair a system that underproduces its good-faith estimate. As advice, treat the estimate in a proposal as a promise the business may have to make good, not a sales figure. Say how it was produced and what it assumes about shading, orientation and equipment, and keep the working in the job file. If an estimate is challenged and nothing was damaged, the professional liability page sets out how a policy treats the claim.
- If you sell and install. You are the retailer, so the registration, the disclosure statement and the employee-only sales force are yours.
- If you only install for another retailer. Your name and license number go onto its disclosure. Ask to see the page, and check that the classification it implies matches the work you will do.
A code the Legislature adopts by statute, not agency rule
Utah does not hand its electrical code to an agency, and it does not leave the choice to each city. The Legislature adopts the National Electrical Code itself, in a section of the Utah Code that sets out the State Construction Code, so the adoption is a statute, not an agency rule. The section’s own paragraph on the electrical code reads:
“the 2023 edition of the National Electrical Code, issued by the National Fire Protection Association”
The section says what the adopted codes are for. Together with the amendments the Code specifies, they are
“are the construction standards to be applied to building construction, alteration, remodeling, and repair, and in the regulation of building construction, alteration, remodeling, and repair in the state”
The State Construction Code also holds Utah’s own changes to the national code. The part of the Code that lists them opens this way:
“The following are adopted as amendments to the NEC to be applicable statewide:”
Authority: Utah Code § 15A-2-103(1)(g); § 15A-2-102(10); § 15A-3-601
For a solar crew, the practical result is a fixed reference point. The solar article of the national code applies as the adopted edition prints it, because the statewide amendments do not alter it. As advice, make sure each crew lead and each designer knows which edition the statute names, and that the drawings, the equipment and the labels all follow that edition rather than an edition an equipment vendor happens to cite.
As advice, ask the permit office where the job sits what it expects with the application, and settle any doubt about the adopted edition with the inspector before the work. How a liability policy treats a fault in finished wiring that comes to light after the job is explained on the general liability page.
Open-market comp and the insurer the Legislature created
Workers’ compensation is compulsory in Utah for the employers its law covers. An employer secures it by insuring with an insurer authorized under the state’s insurance code, or by gaining the Labor Commission’s approval to pay compensation directly as a self-insured employer. Coverage comes from the open market; there is no state fund.
A solar contractor with employees carries a workers’ compensation policy from an authorized insurer, or qualifies with the Labor Commission’s division to pay benefits itself. A contractor whose subcontractors’ workers are treated as its own employees under the Act makes sure the subcontractors are covered.
Authority: Utah Code § 34A-2-201; § 34A-2-103(2); § 31A-22-1014
The compensation chapter of the Code states the duty in a sentence that sets the pattern:
“An employer shall secure the payment of workers' compensation benefits for its employees by:”
The sentence names the routes in turn. The employer may secure payment by
“insuring, and keeping insured, the payment of this compensation with an insurer authorized under Title 31A, Insurance Code, to transact the business of workers' compensation insurance in this state”
Or it may self-insure, by
“obtaining approval from the division in accordance with Section 34A-2-201.5 to pay direct compensation as a self-insured employer”
Neither route is a state fund. Insuring means an insurer authorized under the Insurance Code, and self-insuring means the division’s approval. The Legislature did create an insurer for this coverage, and a section of the Insurance Code, which is still in force, speaks of that insurer’s change of form. Of it, the section says that the insurer
“shall convert from a quasi-public corporation to a mutual insurance corporation”
A mutual insurance corporation sells a policy to an employer in the market, the same way any authorized insurer does. As advice, when your agent presents the options, ask which insurers are quoting and that each is authorized to write workers’ compensation in Utah. The statute-created insurer is a possible seller among those, not a body you must go to and not a fund that pays claims out of the state’s money.
How roof crews, ground crews and service technicians are classified, how subcontractors are treated at audit and how a policy follows a crew that travels are policy questions rather than Utah questions, set out on the workers’ compensation page. As advice, settle before the season who on each job is your employee, and collect a certificate from every subcontractor before its people set foot on an array. Nothing on this page reaches past Utah’s border; for a job in a neighboring state, check that state’s rules.
The Division of Professional Licensing and the Utah Labor Commission are both listed below, and the license is a solar-specialty one. For a roof crew, OSHA’s Fall Prevention Campaign makes a short read before the first tie-off.
Utah divisions that register, license and monitor
The Utah Insurance Department is the state’s insurance regulator. Any agency that sells you a policy, this agency among them, can be looked up on NIPR.com.
The other public bodies behind this page each hold a separate part of the picture. Each link goes to the body’s own site or to the statute it works under, and each role is stated in the body’s own terms:
- Division of Professional Licensing: issues contractor licenses, including the electrical contractor and specialty contractor classifications, and electrician licenses under the Utah Construction Trades Licensing Act
- Division of Consumer Protection: registers solar retailers and enforces the Residential Solar Energy Consumer Protection Act
- Utah Labor Commission: administers workers’ compensation through its Industrial Accidents Division, monitors employer coverage and approves self-insured employers
- Construction Services Commission: advises the Division of Professional Licensing on the licensing of contractors under the Construction Trades Licensing Act
- Utah State Legislature: publishes the Utah Code, including the Construction Trades Licensing Act, the Residential Solar Energy Consumer Protection Act and the State Construction Code
Absent on purpose: a state fund that sells workers’ compensation. In an ordinary week the offices that matter are the licensing division that holds your classification, the consumer protection division if you sell to households, the permit office where the job sits, and the insurer that holds your policy.
The county makeup of Utah’s metropolitan areas
The cards below show the largest metropolitan areas with a principal city in Utah, as the U.S. Census Bureau delineates them, and the Utah counties inside each.
Salt Lake City-Murray, UT
Made up of Salt Lake County and Tooele County.
Provo-Orem-Lehi, UT
Made up of Juab County and Utah County.
Ogden, UT
Made up of Davis County, Morgan County and Weber County.
St. George, UT
Made up of Washington County.
Logan, UT-ID
Part of this metro lies outside Utah; this card lists its Utah counties only: Cache County.
The contractor license is statewide, so a metro line adds a county list rather than a different license. As advice, log the county and the city for every job you price, and check which permit office takes the application before the proposal goes out, because a metro area is a set of counties with offices of their own.
Which policy page answers the retailer duty, the wiring split and the comp rule
The findings above say where Utah’s rules sit. The policies that answer for the work are the ones a solar business carries wherever it works, and each has its own page:
- The wiring split between the solar classification and the electrical licenses, and the electrical contractors you bring in, point to general liability, which also takes up finished wiring and damage to the roof or building under the array.
- The estimate a customer relies on, and the repair duty for a system that underproduces it, point to professional liability.
- The compulsory comp law points to workers’ compensation, placed with an authorized insurer or approved self-insurance.
- Trucks and trailers that carry modules and racking between the yard and the job point to commercial auto.
- Your own gear and the materials staged for a job point to tools and equipment.
- Contracts that ask for limits above the primary layer point to umbrella liability.
Which of those weigh heaviest depends on the work, and the pages on rooftop installation, panel cleaning and maintenance and ground-mount and solar farm construction take each kind of work on its own terms. When you are ready to put the pieces together for Utah jobs, a quote request is the place to start.
State rules decide who may do the work and how; the policies decide who pays when something goes wrong.
- A license, registration or certification is a requirement of the state, not insurance.
A panel for Utah in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. License to install: A state license reaches solar installation. It leaves open damage to the roof, the building or a neighbor’s property from the installation work, which General Liability answers. Solar sales and installer rules: The state sets its own rules for solar sellers, installers or providers. It leaves open a design, sizing or output estimate the customer relied on that turns out wrong, which Professional Liability answers. Electrical code: The state adopts the National Electrical Code statewide. It leaves open a wiring or tie-in fault traced back to the work after the job is done, which General Liability answers. Workers’ compensation: Required for covered employers, bought in the open market. It leaves open a crew member hurt on the job, which Workers’ Compensation answers. Notes: A license, registration or certification is a requirement of the state, not insurance. The conclusion reads: State rules decide who may do the work and how; the policies decide who pays when something goes wrong. No figures are shown.
Utah coverage, services and state offices
What we insure
Coverage lines
Utah solar contractor insurance questions
Does the solar photovoltaic classification let my crew make the final wiring connections?
No. The licensing rule for that classification covers fabricating, constructing, installing or replacing photovoltaic modules and related components, and it excludes any wiring, connections and wire methods. Those belong to the electrical contractor licenses issued by the Division of Professional Licensing. Settle before the bid which licensed electrical contractor will land the conductors, and name that firm in the proposal.
We hold a general electrical contractor license. Do we need the solar classification as well?
The rule says a holder of the general electrical contractor license may additionally perform all work within the scope of the licenses it lists, and the solar classification is among them. That wording answers the scope question. Confirm with the Division of Professional Licensing how your license should appear on the paperwork for a particular job before you rely on it in a bid.
Our reps sell rooftop systems to homeowners. What has to be in place before any agreement is signed?
The business selling a residential system is a solar retailer, and the retailer registers with the Division of Consumer Protection before operating. At the time of the agreement it hands the customer a separate written disclosure statement naming the installer and its state contractor license. The Act also requires a sales representative to be an employee of the retailer.
We build only on commercial roofs and open ground. Does the residential solar law reach our contracts?
Not by its own terms. The Act is written around systems that generate electricity primarily for personal, family or household purposes, and it states that systems that are not residential are outside it. Your contractor license and the other findings on this page still apply. If you also take household work, treat that work as a separate line with its own paperwork.
Which body decides the electrical code my solar wiring is built to?
The Legislature does, by statute. The adoption section of the State Construction Code names the National Electrical Code edition, and the statewide amendments to it sit in a separate part of the code. It is not an agency rule. A designer should draw to the edition the statute prints and ask the permit office what it needs on file before an inspection.
Can a Utah solar business buy its workers’ compensation from a state fund?
No. An employer secures compensation by insuring with an insurer authorized under the Insurance Code, or by obtaining the Utah Labor Commission’s approval to pay direct compensation as a self-insured employer. The Legislature did create an insurer for this coverage, and the statute converted it into a mutual insurance corporation. It sells a policy, so buying from it is a purchase from an insurer.
Our subcontractor’s laborers work on our roofs. Could the law treat them as our employees?
It can. A contractor whose subcontractors’ workers are treated as its own employees under the compensation law needs to make sure those workers are covered. Collect a certificate of insurance from every subcontractor before its people reach an array, and ask your agent how a subcontractor without coverage would be handled at audit.
Before I sign, how do I check an agency’s license with the Utah insurance regulator?
The Utah Insurance Department regulates insurance in the state, and an agency’s license, ours among them, can be looked up on NIPR.com. Ask any agency quoting your program for its license details and check them before you sign. Because Utah has no state fund, your workers’ compensation is placed with an authorized insurer along with the rest of the program.
This page describes insurance for solar contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, interconnection and code requirements change; verify current requirements with the agency named before relying on them.
Get a quote for your Utah solar contracting business
Tell us whether your Utah crews install modules, make the connections or sell to households, and how your crew is paid, and we will build a program around those answers.