Solar Contractor Insurance by State
Oregon Solar Contractor Insurance
Oregon licenses solar work through a contractors board and a codes division, writes residential solar sales rules into a session law, amends the photovoltaic article of its electrical code, and makes workers’ compensation compulsory.
An Oregon solar contractor works under a Construction Contractors Board license whose endorsement follows the type of structure, and under an electrical license from the Building Codes Division for the connections, because the state has no separate license for photovoltaic installation. Residential sales and installations carry their own rules in a session law, which ties the work to those licenses and adds disclosures, contract terms, a right to cancel and a utility approval before installing. The wiring is built to the Oregon Electrical Specialty Code, the National Electrical Code with Oregon’s amendments to the photovoltaic article. Workers’ compensation is compulsory for the employers the law covers, and the state’s own insurer is a public corporation that competes with private carriers rather than a fund.
Each of those answers has a detail that changes the work. The endorsement follows the building rather than the technology, the sales law stops at the residential line, and the code amends rapid shutdown, conductor support and grounding for photovoltaic systems. The sections below take each finding in turn, with the source’s own words where they matter and advice for the owner.
How the policies themselves work for a solar business anywhere is laid out on the solar contractor insurance page and the coverage pages it links to. This page keeps to what is particular to Oregon, whether your business does rooftop installation, runs panel cleaning and maintenance routes or takes on ground-mount and solar farm construction.
A two-column comparison. The left column holds what binds every solar contractor in the state: a contractors board license whose endorsement follows the structure type, with no separate license for photovoltaic installation; an electrical contractor or limited renewable energy license from the codes division, with electricians or limited renewable energy technicians making the connections; the Oregon Electrical Specialty Code, the national code with amendments to rapid shutdown, conductor support and grounding for photovoltaic systems; and compulsory workers’ compensation, met through a carrier or self-insurance qualified with the Director, where the state’s insurer is a public corporation rather than a fund. The right column holds what the session law adds for residential sales: written disclosures before a sale, lease or power purchase agreement; required contract terms and a right to cancel; utility approval of the interconnection application before installing begins; and a bar on deceptive solicitation, with a violation treated as an unlawful practice. No figures are shown.
A contractor license cut by structure type, with an electrical license beside it
Oregon licenses solar installation through the Construction Contractors Board and the Building Codes Division. The Board licenses the contractor, with an endorsement matched to the type of structure. The Division licenses the electrical contractor, the electricians and the limited renewable energy contractors and technicians who make the electrical installation. Oregon has no separate license for photovoltaic installation.
A solar contractor in Oregon holds a Construction Contractors Board license with an endorsement that fits the structure it works on, and holds an electrical contractor license or a limited renewable energy contractor license from the Building Codes Division for the electrical installation, with licensed electricians or limited renewable energy technicians making the connections. For residential customers the state’s solar consumer law requires every person who installs, repairs, replaces or maintains the system to hold a license that fits the scope of the work.
Authority: ORS 479.620; ORS 479.630(15)–(16); ORS 479.525; ORS 701.005(5)(a); ORS 701.021; Oregon Laws 2026, chapter 11, section 2
Start with the electrical side, because it is where solar is named. The Electrical Safety Law lists what a person may not do without the right license, and its list opens with this:
“Without an electrical contractor’s license, engage in the business of making electrical installations, advertise as or otherwise purport to be licensed to make electrical installations or purport to be acting as a business that makes electrical installations.”
The statute also creates classes for renewable work. The class for a business reads:
“A limited renewable energy contractor license to a person who: (a) Employs at least one full-time renewable energy technician; and (b) Does not engage in electrical work other than work that may be performed by a limited renewable energy technician.”
The technician’s license is where the statute writes solar and photovoltaic systems into its text, alongside other generation. A limited renewable energy technician may
“Install, maintain, replace or repair electrical wiring and electrical products that convey energy from or operate on renewable electrical energy generation systems that use wind, solar energy systems, microhydroelectricity, photovoltaic systems or fuel cells”
Notice what that scope is not. It is shared with wind, microhydroelectricity and fuel cells, so it is a renewable-energy license rather than a photovoltaic license. It also reaches maintenance and repair, which matters for a crew that services arrays it did not install.
The Board’s license is the other requirement. The contracting statute puts it this way:
“a person or joint venture that undertakes, offers to undertake or submits a bid to do work as a contractor must have a current license issued by the Construction Contractors Board and possess an appropriate endorsement as provided in this section.”
The endorsement is the part that follows the structure. The Board’s chart says:
“Contractors that perform work on residential and large commercial structures must have both a residential and a commercial endorsement.”
The endorsement a contractor holds is chosen by the buildings it works on, not by the panels it sets on them. The Board’s license is a general construction license rather than a solar credential, and the Division’s licenses are electrical, so a solar business holds a license from each body for the work each body licenses.
As advice:
- Match the endorsement to the structures your bids cover, and name in each proposal who holds the electrical license for the connections. Ask an electrical subcontractor for its license along with the certificate of insurance.
- If your crews only clean or service arrays, do not read this section as clearing the work of either license. The technician scope above includes maintaining and repairing wiring, so describe your exact tasks to the Board and the Division and get their answers in writing.
How a liability policy treats the electricians you subcontract, and damage your crews cause on a roof or in a building, is set out on the general liability page.
A session law for residential solar sales that borrows the license list
Oregon’s solar consumer law, passed as a session law, regulates residential solar sales and installations. It requires a license that fits the scope of the work for every person who installs, repairs, replaces or maintains the system, written disclosures before a sale, lease or power purchase agreement, required contract terms, a customer right to cancel, utility interconnection approval before installation begins, and bans deceptive solicitation.
Authority: Oregon Laws 2026, chapter 11 (House Bill 4029), sections 1–6, amending ORS 646.608
This is a residential law, and its definitions say so. It defines a solar energy system by the use it serves:
“an assembly of wiring, equipment, devices and components that has the primary purpose of converting sunlight into electricity by photovoltaic effect for a resident’s use for personal, family or household purposes”
The law binds the solar energy contractor and any sales agent who solicits for it, for systems on residential real property that a resident owns or leases. The disclosure names the installer and the license numbers of the electrician and contractor who will do the work, itemizes the price and any dealer fee paid to a lender, and describes the equipment, production estimate and warranties. The contractor may not begin installing until the electric utility approves the interconnection application. A violation is an unlawful practice under the state’s unlawful trade practices law.
The licensing section is where the law borrows the licenses described above. It keeps a sales agent or solar energy contractor from executing or performing an installation contract with a resident unless it, and anyone installing, repairing, replacing or maintaining the system on its behalf,
“has a license that is necessary and appropriate for the scope of work the person will perform.”
The reach is wider than the contractor on the roof, because it covers whoever installs on the contractor’s behalf. As advice, ask each subcontractor for the license that fits its scope before the contract is executed, and keep the copy with the job.
The disclosure section sets a duty that comes before the sale. It opens:
“Before concluding a sale or lease of a solar energy system to a resident or before entering into a power purchase agreement with a resident, a sales agent or solar energy contractor shall provide the resident with the following disclosures:”
The Oregon Legislature publishes the Oregon Revised Statutes and the enrolled text of session laws, which is where this law’s enrolled text can be read.
A dealer fee, a utility approval and a solicitation rule in a residential proposal
Clauses of the law turn parts of an ordinary residential proposal into statements the customer is entitled to. The advice that follows is not an additional rule; it is what an owner can do so the paper matches the statute.
The lender’s fee. Among the disclosures to a resident, the law lists this:
“State the exact amount the sales agent or solar energy contractor paid as a dealer fee or other inducement to a lender to obtain financing, even if the financing is not incorporated directly into the installation contract.”
As advice, ask each finance partner in writing what it pays or charges, and keep its answer in the job file, because the statement is exact and so is the duty to make it.
The utility’s approval. The law sets the order of events:
“An electric utility must approve an application to interconnect a customer’s solar energy system with the electric utility’s power grid before a solar energy contractor may begin installing the solar energy system.”
The rule binds the contractor’s start, not the customer’s signature. Schedule a residential install behind the approval, and keep the application and the approval together in the file. The professional liability page explains how a policy treats a paperwork error that holds up a project.
What a salesperson says. The law bars a deceptive solicitation:
“A person may not conduct a solicitation using any deceptive statement or representation concerning the costs, financing or terms and conditions of an installation contract”
The clause names costs, financing and terms, the topics a sales script covers by design. As advice, write the script from the contract rather than the other way around, and train every salesperson to say only what the contract says.
The national electrical code with Oregon’s photovoltaic amendments
Oregon adopts the National Electrical Code statewide as the Oregon Electrical Specialty Code, issued by the Building Codes Division. The current Oregon code is based on the newest edition of the National Electrical Code that the Division’s adoption table lists, and amends its rapid shutdown, conductor support and grounding provisions for photovoltaic systems.
Solar wiring in Oregon is built to the Oregon Electrical Specialty Code, which is the NEC with Oregon’s listed amendments, under an electrical permit and inspection by the Division or a city or county that has taken on the inspection duty. The rapid shutdown, conductor support and grounding amendments to the photovoltaic article apply to every array on a building.
Authority: OAR 918-305-0100; OAR 918-305-0105 (Table 1-E); ORS 479.525
The Division publishes a table of the amendments it has adopted. The table’s preface names the edition:
“The 2026 Oregon Electrical Specialty Code (OESC) is based on the 2026 edition of the National Fire Protection Association (NFPA) 70, National Electrical Code (NEC)”
The same table says what Oregon leaves alone:
“Language contained in the 2026 NEC not listed in this table has not been amended by Oregon.”
That sentence is the way to read the code: the model photovoltaic article applies as written except where the table lists a change. For rooftop arrays the table lists a change to the rapid shutdown requirement, which reads:
“PV system circuits installed on or in buildings shall include a rapid shutdown function to reduce shock hazard for firefighters in accordance with 690.12(A) through 690.12(D).”
The table also amends how exposed conductors are supported and secured and the grounding of buildings and structures that support photovoltaic systems. Those are the details a racking crew and a wiring crew handle on every roof, so a design drawn only from the model code can miss them.
As advice, give the designer the Division’s table, not only the model code, before the layout is final, and ask the permitting office who inspects the job, because the Division or a city or county that has taken on the duty does it. A fault in finished wiring that surfaces after the inspection is a liability question, taken up on the general liability page.
A compulsory comp duty, and a state insurer that is a corporation rather than a fund
Workers’ compensation is compulsory in Oregon for the employers its law covers. An employer maintains assurance with the Director of the Department of Consumer and Business Services by being a carrier-insured employer or a self-insured employer. A statute-created insurer competes with private insurers for the business; it is a corporation, not a government fund.
A solar contractor with employees insures its workers’ compensation with an insurer, including the state’s statute-created insurer, or qualifies with the Director to self-insure. The Construction Contractors Board’s licensing steps list workers’ compensation insurance for a contractor that hires employees.
Authority: ORS 656.017(1); ORS 656.407(1); ORS 656.751(1); ORS 656.752(1)
The statute states the duty in its opening sentence:
“Every employer subject to this chapter shall maintain assurance with the Director of the Department of Consumer and Business Services that subject workers of the employer and their beneficiaries will receive compensation for compensable injuries as provided by this chapter”
The ways of qualifying follow. An employer may qualify
“As a carrier-insured employer by causing proof of coverage provided by an insurer to be filed with the director”
or
“As a self-insured employer by establishing proof that the employer has: (A) An adequate staff qualified to process claims promptly; and (B) The financial ability to make certain the prompt payment of all compensation”
The state’s own insurer is a creature of statute, and the section that creates it states its purpose. The insurer
“is created for the purpose of transacting workers’ compensation insurance and reinsurance business.”
and the same section adds that it
“also may insure an Oregon employer against any liability such employer may have on account of bodily injury to a worker of the employer arising out of and in the course of employment as fully as any private insurance carrier.”
Read together, the statutes describe a public corporation created to transact workers’ compensation insurance, competing for employers’ business as a private carrier would. It is a carrier among the choices an Oregon employer has, and the statutes do not make it a fund that employers must use.
For a solar business that leaves a direct path. Quote the policy with the state’s insurer and with private carriers, or qualify with the Director to self-insure. The Construction Contractors Board also lists workers’ compensation insurance among its licensing steps for a contractor that hires employees, so the policy is part of the licensing steps, not an afterthought.
How roof crews, ground crews and service technicians are classified, how subcontractors are treated at audit and how a policy follows a crew that travels are policy questions rather than Oregon questions, set out on the workers’ compensation page. As advice, settle before the season who on each job is your employee, and collect a certificate from every subcontractor before its people set foot on an array. Nothing on this page reaches past Oregon’s border; for a job in a neighboring state, check that state’s rules.
Oregon lists a Construction Contractors Board and a Building Codes Division below. Alongside them, OSHA’s Fall Prevention Campaign gives the federal three-step view of working from heights.
The licensing bodies, the code office and the Legislature’s statute pages
Each public body behind this page holds a separate part of the picture. Each link goes to the body’s own site, followed by its role:
- Construction Contractors Board: licenses contractors and sets their endorsements by the type of structure, enforces the contractor licensing law and takes bonds and liability insurance
- Building Codes Division: issues electrical contractor, electrician, limited renewable energy contractor and technician licenses, adopts the Oregon Electrical Specialty Code and administers electrical permits and inspection; part of the Department of Consumer and Business Services
- Oregon Legislature: publishes the Oregon Revised Statutes and the enrolled text of session laws
To check that an insurance agency is licensed, including ours, use NIPR.com. Ask any agency that quotes your program for its license details and check them before you sign.
Absent on purpose: a license written for photovoltaic installation alone, and a government fund that employers must use for workers’ compensation. In an ordinary week the offices that matter are the Board, which licenses the contractor, the Division, which licenses the electrical work and adopts the code, and the permitting office of the city or county where the job sits.
Oregon counties grouped into the metro cards
The cards below show the largest metropolitan areas with a principal city in Oregon, as the U.S. Census Bureau delineates them, and the Oregon counties inside each.
Portland-Vancouver-Hillsboro, OR-WA
Part of this metro lies outside Oregon; this card lists its Oregon counties only: Clackamas County, Columbia County, Multnomah County, Washington County and Yamhill County.
Salem, OR
Made up of Marion County and Polk County.
Eugene-Springfield, OR
Made up of Lane County.
Bend, OR
Made up of Crook County, Deschutes County and Jefferson County.
Medford, OR
Made up of Jackson County.
Albany, OR
Made up of Linn County.
Because the electrical license and the Board’s license apply statewide, a metro line does not change which license you hold. It can change the office that issues the permit and inspects the work. As advice, log the county and the city for every job you price, and ask that office who inspects before the proposal goes out.
Which policy page answers each Oregon rule
The findings above say where Oregon’s rules sit. The policies that answer for the work are the ones a solar business carries wherever it works, and each has its own page:
- The electrical license, the subcontracted electricians and finished wiring point to general liability, which also takes up damage to the roof or building under the array.
- Production estimates and designs a customer relied on, and a paperwork error in an interconnection file, point to professional liability.
- The compulsory comp duty and the choice among carriers point to workers’ compensation.
- Trucks and trailers that carry modules and racking between the yard and the job point to commercial auto.
- Your own gear and the materials staged for a job point to tools and equipment.
- Contracts that ask for limits above the primary layer point to umbrella liability.
Which of those weigh heaviest depends on the work, and the pages on rooftop installation, panel cleaning and maintenance and ground-mount and solar farm construction take each kind of work on its own terms. When you are ready to put the pieces together for Oregon jobs, a quote request is the place to start.
State rules decide who may do the work and how; the policies decide who pays when something goes wrong.
- A license, registration or certification is a requirement of the state, not insurance.
A panel for Oregon in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. License to install: A state license reaches solar installation. It leaves open damage to the roof, the building or a neighbor’s property from the installation work, which General Liability answers. Solar sales and installer rules: The state sets its own rules for solar sellers, installers or providers. It leaves open a design, sizing or output estimate the customer relied on that turns out wrong, which Professional Liability answers. Electrical code: The state adopts the National Electrical Code statewide. It leaves open a wiring or tie-in fault traced back to the work after the job is done, which General Liability answers. Workers’ compensation: Required for covered employers, bought in the open market. It leaves open a crew member hurt on the job, which Workers’ Compensation answers. Notes: A license, registration or certification is a requirement of the state, not insurance. The conclusion reads: State rules decide who may do the work and how; the policies decide who pays when something goes wrong. No figures are shown.
Nearby states we also write
Oregon coverage, services and state offices
What we insure
Coverage lines
Outside authorities
Oregon solar contractor insurance questions
Is there a solar endorsement on the Construction Contractors Board license for an Oregon array?
No. Oregon has no separate license for photovoltaic installation, and the Construction Contractors Board sets endorsements by the type of structure, residential or commercial, rather than by the kind of work. A contractor on residential and large commercial structures needs a residential and a commercial endorsement. The wiring is licensed apart, through the Building Codes Division. Match the endorsement to the buildings you bid, then confirm the electrical license that covers the connections.
Our crews only service arrays and never install. Which license covers a maintenance route?
Do not assume that none does. The statute’s limited renewable energy technician scope reaches installing, maintaining, replacing or repairing electrical wiring and electrical products on generation systems that include solar and photovoltaic systems, so wiring work on a service call can be electrical work. Cleaning alone is a separate question: describe your exact tasks to the Construction Contractors Board and the Building Codes Division, and get their answer before you price the route.
Is a commercial customer covered by the residential solar sales law?
Not by its terms. The law is written for residential real property that a resident owns or leases, and it defines a solar energy system by a resident’s use for personal, family or household purposes. Licensing, the electrical code and compulsory comp still apply to a commercial job. When the customer is a household, treat the job as covered and prepare the disclosures before the contract is signed.
The utility has not yet approved the customer’s interconnection application. May the crew start mounting?
On a residential job, no. The law says an electric utility must approve an application to interconnect a customer’s solar energy system before a solar energy contractor may begin installing it. Build the approval into the schedule, order materials to match, and tell the customer in writing when the crew can start, so a delayed approval is not mistaken for a delayed contractor.
Do we have to tell a customer what we pay the lender who finances the system?
For a residential sale, lease or power purchase agreement, yes. Among the disclosures the law lists is the exact amount a sales agent or solar energy contractor paid as a dealer fee or other inducement to a lender to obtain financing, even if the financing is not part of the installation contract. Keep your lender partner’s terms on file so the figure is ready before the proposal goes out.
Which rapid shutdown requirement will an inspector check on a rooftop array?
The Oregon Electrical Specialty Code, which is the National Electrical Code with Oregon’s listed amendments. The Division’s amendments table rewrites the rapid shutdown rule for photovoltaic circuits on or in buildings, and it also amends conductor support and grounding for those systems. Read the table’s entries, not only the model code, before the design is final, and ask the permitting office who inspects the job.
If the state’s comp insurer is a public corporation, must our crew be insured there?
No. An Oregon employer maintains assurance with the Director either as a carrier-insured employer or as a self-insured employer. The statute-created insurer is a public corporation set up to transact workers’ compensation insurance, and it may insure an employer as fully as any private carrier, so it is a carrier among the choices, not a fund you must join. Collect quotes from it and from private carriers.
This page describes insurance for solar contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, interconnection and code requirements change; verify current requirements with the agency named before relying on them.
Get a quote for your Oregon solar contracting business
Tell us whether your Oregon crews work on homes or on larger buildings, who holds the electrical license on each job, and how your crew is paid, and we will build a program around those answers.