Owner Resources

Solar Panel Business Plan: Where Insurance Fits

A solar panel business plan touches insurance in several sections, not only the risk page: operations, risk, staffing, contracts, financing and growth each depend on it. This is general information, not advice about your company, so confirm specifics with an adviser and your state licensing board.

Insurance questions belong in the sections that create them

The plainest way to handle insurance in a plan is to let each section raise its own questions. A plan that confines insurance to one paragraph near the end tends to read as an afterthought, and an underwriter, a lender or a large customer notices.

The rest of this page goes through the sections in order and says what to write in each. One rule runs through all of them. When a section tempts you to type a cost, a margin, a revenue target or a loss estimate, write the question behind the number instead. A plan with honest open questions is stronger than one with figures that no source supports, and a licensed agent can help turn the questions into answers.

If you are still at the earlier stage of forming the company, the startup post covers the order of operations first.

Operations: describe the work in the words a policy will use

The operations section should say what the company does, where it works and how, and that description becomes the starting point for every application. Rooftop installation, cleaning and maintenance, and ground-mount construction are read differently, so name which you sell and which you only hope to sell later.

Include the details an underwriter asks about. Does the company work on houses, commercial roofs or both? Does it add batteries? Does it handle the electrical work itself or subcontract it? The Department of Energy’s page on solar photovoltaic system design basics is a useful reference for describing the components of a system accurately.

Precision here protects you later. A policy responds to the operations it was written for, so a description that matches the real business is worth more than a flattering one.

Risk: name the exposures and the policy expected to meet each

The risk section works best as a short map. For each exposure, state what could go wrong, which policy is expected to respond, and what question remains for your agent. Exposures for a solar contractor typically include harm to a customer’s property, injuries to the crew, vehicles on the road, tools and staged materials, and defects that surface after the system is finished.

The matching policies are explained on the general liability page, the workers’ compensation page, the commercial auto page and the tools and equipment page. If the company designs or sizes systems, add professional liability, since design errors are commonly left out of general liability.

Do not estimate how often a loss will happen or what it will cost. You have no source for either, and the plan does not need them. The point of the section is to show that you understand how a single loss could cross several policies.

Staffing: write down who is an employee and who is not

The staffing section decides which policies the company needs, so be specific about the arrangement. Describe the roles, say which are employees and which are subcontractors, and name who supervises the crews. Leave out head counts and wages, which the plan can fill in from its own records.

The IRS publishes a page on whether a worker is an independent contractor or an employee. Read it before you write the section, because the label the plan assigns does not decide the outcome.

For subcontractors, the plan should describe a process: collect certificates, compare their policies with your contract requirements, and decide who carries which risk. Describe the process, then leave room for an agent to test it.

Contracts: record what you promise and what you require

A customer contract is a stack of promises, and the contracts section should say which promises the company is prepared to make. Customers commonly ask for additional insured status, for indemnity, and for coverage in particular forms. Each promise is only as good as the policy that stands behind it.

Write down which clauses you will accept as drafted, which you will negotiate, and which you will refuse. For each insurance clause, ask whether your agent can show it on a certificate. When you hire others, mirror the process: say what you will require of them.

Large commercial and ground-mount contracts often carry heavier insurance exhibits than a residential agreement. The solar program page shows how one set of policies can meet several kinds of contract.

Real-World Scenario: A residential installer’s plan describes rooftop work on houses and nothing else. A property manager then offers a commercial roof and a battery installation, and the owner says yes without reading the policy description or telling the agent. When a claim arises from that job, the carrier compares the work to what was disclosed. Whether the policy responds depends on its wording and how the work was described, and the owner learns that a short call before accepting the job would have settled the question. The plan’s growth section could have required that call.

Financing: assume outsiders will read the program

A lender, an investor or a large customer may read the insurance section more closely than anyone inside the company. Write it so that a stranger can follow it. Name the policies you expect to carry, describe who they protect, and say that proof will be available on request.

Do not state limits or amounts unless a policy in your hands supports them. If the plan must show that the company can meet a customer’s requirements, say that an agent has reviewed those requirements against the program, and attach the review rather than summarizing it from memory.

Budget: carry insurance as an assumption with an owner

Cost sections invite invented numbers, and insurance is an easy line to guess at. Resist that. Write the line as an assumption that names its owner, its source and its status: the assumption is that the company carries the policies listed in the risk section, the owner is whoever manages the budget, the source is a quote from a licensed agent, and the status is pending until that quote arrives.

Then list what moves a quote, since the plan can describe drivers without a figure: the type of work, the size of the payroll, the vehicles, the tools and materials kept on hand, the claims history, and the contracts signed. The Department of Energy keeps a page on solar soft costs, a reasonable companion when you are thinking about project costs beyond the hardware.

When a real quote arrives, replace the placeholder, note where it came from, and keep the quote with the plan. A budget line with a traceable source is something a lender can accept, and one with a guess is something a lender will question.

Growth: report new work before it begins

The growth section describes what the company will add, and it should carry a rule: no new type of work starts until the agent has heard about it. Battery storage, commercial roofs, ground-mount builds, a new service area and a new subcontractor relationship can each change how a policy responds.

The Department of Energy’s page on permitting and inspection for rooftop solar is a useful reference when a plan adds a new jurisdiction, because permitting practice differs from place to place. Licensing differs by state too, so confirm each new market with its licensing board.

If part of the growth plan is building ground-mounted projects, the construction-side questions are a different set, and our solar farm planning post takes them up. Set a review date in the plan, tie it to each renewal, and write what changed since the last one.

Bring the plan to an agent before you bring it to a lender

A licensed agent can read the plan against real policies and flag where a description, a promise or an assumption does not match. Ask the agent to mark every sentence in the plan that depends on a policy, and to say which of those sentences the policy wording supports and which it does not. The marked copy becomes the to-do list for the revision. Bring the operations description, the staffing arrangement and the contract clauses you expect to see. We place solar contractors in the states where we are licensed, and you can read who we are before you send your plan for a quote.

The sections of a plan that insurance touches

  1. Operations Describe the work in the words a policy will use
  2. Risk Name each exposure and the policy expected to answer
  3. Staffing Separate employees from subcontractors
  4. Contracts Record what customers require you to carry
  5. Financing Expect outside readers to ask for proof
  6. Growth Report new work before it begins
Insurance questions sit in every layer of a contractor’s plan, not only the risk page; the right questions depend on your work and your state.

A stack of layers, from the base of the plan to the top. Operations, where the work is described. Risk, where exposures are named. Staffing, where employees and subcontractors are defined. Contracts, where promises to customers are recorded. Financing, where outside readers examine the program. Growth, where new work is added. Each layer carries a note on the insurance question that belongs there. No figures are shown.

Frequently asked questions

Does a business plan for a solar company need an insurance section?

It helps to have one, but insurance usually shows up better spread across the plan than in a single block. Operations, staffing, contracts and financing each depend on coverage. A short summary section can tie it together, naming the policies you expect to carry and the questions still open. Have a licensed agent read that summary before anyone outside the company does.

Should I put insurance costs in the plan if I do not have quotes yet?

Write the assumption, not a guess. State which policies the plan expects, what drives their cost, and that the amount is pending a quote. A figure with no source invites a reader to doubt the rest of the plan. Once an agent returns real quotes for your actual operations, replace the placeholder and note the date the quote was received.

Will a lender or investor ask about insurance?

Often, yes. Lenders, investors and large customers commonly want to see that the company carries sensible coverage, and some will ask for specific policies or certificates. What they ask for varies. Treat their questions as a prompt to bring the plan to an agent, and keep the answers the agent gives you with the plan itself.

How does subcontracting change what I write about insurance?

It adds a requirement section. If subcontractors do part of the work, the plan should say that you will collect certificates from them, review their policies against your contracts, and decide who carries which risk. A subcontractor’s policy does not replace your own coverage. Describe the process in the plan, and let an agent check that it works.

What should the risk section of the plan actually contain?

Name the exposures your work creates, such as work at height, vehicles, tools, stored materials and completed systems. Beside each, note the policy expected to respond and the open question for your agent. Skip invented loss estimates. A risk section is persuasive when it shows that the owner understands how a loss would travel across policies.

How often should I revise the plan’s insurance assumptions?

Revise them whenever the work changes, and at each renewal. Adding battery storage, commercial roofs, ground-mount jobs or a new region can alter how a policy responds. Growth that outruns the description on your policies is a common source of surprise at claim time. A short review with your agent whenever the plan changes is usually enough.