Owner Resources

How to Start a Solar Panel Business: The Insurance to Have First

Starting a solar panel business means settling the work, the entity, the training, the permits and the contracts in an order that keeps insurance questions from arriving late. This is general information, not advice about your own company, so confirm licensing and coverage with your state licensing board and an adviser.

Decide what work you will sell before you decide anything else

Every later choice, including the insurance, follows from a plain description of the work. Rooftop installation, panel cleaning and maintenance, and ground-mount construction are three different businesses to an underwriter, even when one owner hopes to do all three. Rooftop crews work at height on someone else’s building. Service routes touch many arrays briefly. Field builds move earth and equipment across open ground.

Write the description in the words you would use to explain the company to a stranger. An insurance application asks for it, a customer contract assumes it, and a licensing office may sort you by it. The installer program page shows how rooftop work is read, and the solar contractor program page shows how the three kinds of work fit together under one roof.

A company that starts narrow and describes itself honestly usually finds the early insurance conversation simpler. You can widen the description later, provided you tell your agent before the new work begins.

Choose the business structure with the policies in mind

The structure you form decides whose name appears on every policy and every contract. The U.S. Small Business Administration keeps a guide to launching a business that walks through the steps owners commonly take and includes a step on business insurance. It is a sensible map of the whole territory.

Entity questions belong with an attorney and an accountant, not with this page or with an insurance agent. What an agent can do is make sure the named insured on each policy matches the entity that signs contracts and hires people. A mismatch, such as a policy issued to the owner personally while the company signs the contract, is the kind of quiet gap that surfaces only after a claim.

Form the entity first, then place the coverage in its name. Bring the finished paperwork to the agent instead of describing it from memory.

Training and certification show an underwriter how your crews work

Solar work rewards trained crews, and training is also something an underwriter can ask about. NABCEP publishes certification programs for solar professionals, and the Department of Energy keeps a page on solar design and installation training. Both are useful to an owner deciding how to prepare a first crew.

Neither replaces a policy, and neither guarantees a particular quote. What training does is give you something concrete to say about how the work is supervised and how problems are caught before a customer finds them. Keep a simple record of who holds which certification and who has been trained on which tasks.

Be precise when you describe it. Claiming a credential that a person does not hold is an application problem that can follow you into a claim, so describe exactly what each person has completed.

Licenses and permits vary, so confirm them locally

Licensing for solar work varies by state, and permitting varies by locality, so the only reliable answer to what you need is the one you get from the state licensing board and the local building office. Nothing here states what any state requires. Some places license solar work separately from electrical or roofing work, and some do not.

The Department of Energy offers a page on permitting and inspection for rooftop solar that explains why the process matters and how it tends to work. Read it to learn the vocabulary, then ask the local office how it applies to you.

Insurance enters in two ways. A licensing or permitting office may ask for proof of coverage, and a license may be conditioned on holding particular policies. Ask each office what proof it wants and in what form, then give your agent that answer in writing. You can look at the states where we are licensed to see where we place solar contractors, but the rules in your own state remain a question for the board.

Decide how you will staff the crews before the first job

How you staff determines which policies you need, so settle it before the first install. Employees bring workers’ compensation into the picture, and the workers’ compensation page explains how that coverage meets roof and ground work. Subcontractors bring a different set of questions about certificates, contract language and who answers for what.

Owners are tempted to treat crew members as independent contractors to keep the early payroll simple. The IRS publishes a page on whether a worker is an independent contractor or an employee, and it is worth reading before you decide. The label you choose does not control the outcome, and an injured worker who was treated as independent may still be judged an employee.

Falls are a central hazard of roof work. NIOSH has a page on falls at work that describes the problem in plain terms. A safety plan for the crew belongs in the launch alongside the policies, and an underwriter is likely to ask about it.

Real-World Scenario: A two-person startup sells its first rooftop jobs and pays a helper in cash as an independent contractor. The helper slips on a wet roof edge during the second job. The owner assumed that the general liability policy would respond, but that policy is aimed at harm to other people and their property, not at the company’s own workers. Whether the helper is treated as an employee, and whether a workers’ compensation policy should have been in place, becomes the argument. The owner finds it much easier to settle the staffing question with an agent before the first ladder goes up.

Match each coverage to a step in the launch

Each policy answers a different question, and the launch order shows when each one starts to matter. The sequence below is a way to think, not a rule, and the form in your hands decides every claim.

  • General liability answers for harm to other people and their property from your work, and it is usually the first policy a customer asks about. See the general liability page.
  • Workers’ compensation answers for injuries to your own people, and it comes into play as soon as anyone is on payroll.
  • Commercial auto answers for the vehicles, as the commercial auto page explains, and it matters from the first drive to a site.
  • Tools and equipment coverage follows the gear, the stored materials and the staged panels. The tools and equipment page covers how.
  • Professional liability matters when you design, size or specify a system, because design errors are commonly left out of general liability.

An umbrella sits above liability policies and is usually a later addition. Ask an agent which of these your first customer contract effectively requires, because some contracts require several of them before the crew arrives.

Read the first customer contract before you sign it

A first contract often does more to set your insurance program than any plan you wrote. It may require particular coverages, ask you to name the customer as an additional insured, and ask you to indemnify the customer for losses. Those are promises, and a policy may or may not stand behind them.

Read each insurance clause and ask one question of it: can my agent show this on a certificate? If the answer is no, negotiate the wording before you sign, not after the work is done. Keep the contract with your policies so that anyone reading a claim can see what you agreed to.

Contracts also assign when risk passes from one party to another, which decides who insures materials waiting on a site. Our post on motor truck cargo coverage shows how one such question gets sorted by reading the wording.

Questions to put to an agent before the first job

A licensed agent can only test your plan against the facts you bring, so bring them in a short list.

  • What work will we do in the first year, and what might we add?
  • Which legal name signs contracts and employs people?
  • Do we have employees, subcontractors or both?
  • What proof does each licensing or permitting office want?
  • What does our first customer contract require us to carry?
  • Which of our tools, vehicles and stored materials need their own cover?

If you are also writing a plan, the business plan post shows where each of these answers belongs on the page. You can read who we are, then send your plan and your first contract for a quote.

The order of a launch, and the insurance question at each step

  1. Choose the work Which operations will an application describe?
  2. Form the business Which legal name goes on each policy?
  3. Train and certify What can the crew show an underwriter?
  4. License and permit What proof does the local office want?
  5. Staff the crews Who is an employee and who is not?
  6. Place the coverage Do the policies match the real scope?
  7. Sign the first contract Can a certificate satisfy each clause?
A new solar contractor meets these steps in roughly this order; the right order for your company depends on your state and your contracts.

A flow of steps from left to right. Choose the work you will sell. Form the business. Train and certify the crew. License and permit the work. Staff the crews. Place the coverage. Sign the first contract. Each step carries a note naming the insurance question that belongs there. No figures are shown.

Frequently asked questions

Should I buy insurance before or after I form the company?

Form the company first, then buy coverage in its name, because a policy should name the entity that will sign contracts and employ the crew. Talk to an agent while you are choosing the structure so the application matches the paperwork. A policy bought for the wrong name can leave a gap that nobody notices until a claim.

Do I need coverage before I install anything for a first customer?

In practice, yes. Customers, property managers and general contractors commonly ask for a certificate of insurance before they let a crew on site, and some lenders and utilities may ask for proof as well. Requirements vary by state and locality, so confirm what yours demand with the licensing board and an adviser before you sign.

Do I need insurance if I only use subcontractors and have no employees?

Yes, you still need to think it through. Subcontractors are not a substitute for your own coverage, and a worker you treat as independent may be judged an employee after an injury. Contracts also tend to require your liability coverage whoever turns the wrench. Ask an agent how your subcontractor arrangement affects the program.

Does a certification change what insurance I need?

A certification does not replace any policy, but it can help an underwriter understand how your crews are trained. Certification programs for solar professionals are run by independent bodies, and what an insurer does with that information varies by company. Tell your agent about the training your people have, and let the quote reflect it.

Which coverage should a new solar company put in place first?

Most new installers begin with general liability and, once anyone is on payroll, workers’ compensation, then add commercial auto, tools and equipment, and an umbrella as the work grows. The order depends on your contracts and your state. Treat that as a starting point, and have an agent test it against your actual business plan.

Can I start small and add coverage as I grow?

You can build a program in stages, but each new type of work should be reported before you begin it. Adding batteries, commercial roofs or ground-mount jobs can change how a policy responds. Growing past what your policies describe is a common way for a coverage gap to open. Review the program whenever the scope of your work changes.