Solar Contractor Insurance by State
New Hampshire Solar Contractor Insurance
New Hampshire licenses electrical installation statewide without naming solar work, has not confirmed a contractor license or a solar sales rulebook, adopts the national electrical code by statute and makes workers’ compensation compulsory with no state fund that insures employers.
New Hampshire requires a state license for electrical installation and defines that work by what it touches rather than by solar, so a solar contractor holds an electrician license for the wiring while its text names no solar work. Whether the state licenses general or home-improvement contractors is not confirmed, and so is whether it sets its own rules for solar sellers. The wiring on a building is built to the National Electrical Code that the state building code adopts by statute for every building and structure built in the state, and workers’ compensation is compulsory, secured with a licensed insurer or by proof of the ability to pay directly, with no state fund that insures employers.
Some of those answers are firm and others are open, and this page keeps the difference visible. The license text is firm about electrical work and silent about solar, the contractor license and the solar sales rules are not confirmed, and the code and comp findings rest on statutes whose words appear below. Each section gives the source’s own words where they matter and advice for the owner whose name is on the proposal.
How the policies themselves work for a solar business anywhere is laid out on the solar contractor insurance page and the coverage pages it links to. This page keeps to what is particular to New Hampshire, whether your business does rooftop installation, runs panel cleaning and maintenance routes or takes on ground-mount and solar farm construction.
A top-to-bottom flow that follows a New Hampshire solar job through the state. It begins with the statewide electrician license, which covers electrical installation made for pay and defines the work by what it touches, naming no solar work. Next is the general or home-improvement contractor license, which is not confirmed at the state level. Then comes the sales side: whether the state sets its own rules for solar sellers is not confirmed at the state level, and only the general consumer protection chapter is cited. The wiring follows, built to the national electrical code that the state building code adopts by statute for every building and structure built in the state, with permits issued by counties, towns and cities. The flow ends at the payroll, where workers’ compensation is compulsory and is secured with a licensed insurer or by proof of the ability to pay directly, with no state fund that insures employers. No figures are shown.
A statewide electrician license whose text never says solar
New Hampshire requires a state electrician license for electrical installations made for compensation. The licensing chapter defines the work by what it touches — electrical conductors, fittings, devices and fixtures for heating, lighting or power purposes — and does not name solar work.
A solar contractor’s wiring crew works under a New Hampshire master electrician license held by the business, with journeymen and apprentices working under it, because the license reaches the installation of electrical conductors and equipment for power purposes.
Authority: RSA 319-C:1; RSA 319-C:2
The licensing chapter opens with a bar on unlicensed installation for pay:
“No electrician installation shall be made for compensation, unless made by an electrician or other person licensed by the office of professional licensure and certification, except as provided in this chapter.”
Read what the bar is written about. It speaks of an electrician installation made for compensation, so it turns on who does the work and whether anyone is paid for it, not on the kind of equipment. The chapter then defines the work itself:
“means the installation, repair, alteration and maintenance of electrical conductors, fittings, devices and fixtures for heating, lighting or power purposes, regardless of the voltage.”
The definition runs by what the work touches: conductors, fittings, devices and fixtures for heating, lighting or power purposes, whatever the voltage. It names no solar, photovoltaic or renewable-energy work, and this page reads no further into it than that. The text confirms that a license exists and says nothing of solar work. It does not say the license reaches solar installation, and it does not say the license stops short of it.
The chapter also defines the person who holds the business-side license:
“means a person either employed by another master electrician or who, as a business, hires or employs another to do electrical work, or, without hiring another, makes electrical installations as a principal or auxiliary business for his or her own account.”
That definition covers a person who hires others to do electrical work and a person who makes installations as a principal or auxiliary business for their own account. The office of professional licensure and certification issues the statewide electrician license, and the electricians’ board is the board under the electricians chapter whose rules govern the license.
As advice, decide before the bid which master electrician stands behind the wiring on each job, and name that person in the proposal. If your business subcontracts the tie-in, ask the electrician for the license along with the certificate of insurance and file them together. Because the text does not say whether an array’s scope falls inside the license, ask the licensing office in writing, describe the scope from racking to the connection, and keep the dated reply with the job file.
How a liability policy treats the electricians you subcontract, and a fault in completed wiring that comes to light later, is set out on the general liability page.
A general or home-improvement contractor license: not confirmed at the state level
The electrician license is the only statewide credential this page can confirm for the work. Whether New Hampshire also licenses general or home-improvement contractors is not confirmed at the state level. That is a finding about what has been established, and it is not a statement that no such license exists. Nothing on this page says there is none.
The same caution applies to a license written for solar alone, which this page does not confirm. What follows is advice for an owner who would rather ask than assume:
- Ask the licensing office what, if anything, a contractor must hold beyond the electrician license before signing a contract to install an array on a building.
- Ask whether the answer changes for a crew that sets racking and mounts modules while a licensed electrician makes the connections.
- Ask the building official in the town or city where the array goes up whether the permit application wants a contractor registration, a license number or only the electrician’s.
- Put the answers in the proposal file with a date and the name of the person who gave them, so the file shows what you relied on when you bid.
Until those answers are in hand, treat the question as open rather than settled in either direction. The professional liability page explains how a policy treats an error in the paperwork or the scope that a customer relied on.
Consumer protection with no solar provision found, and a sales rulebook not confirmed
Not confirmed.
Authority: RSA 358-A (general consumer protection; no solar provision found)
Whether New Hampshire sets its own rules for solar sellers, installers or providers is not confirmed at the state level. The citation above is the state’s general consumer protection chapter, and it contains no solar provision. That chapter is not the whole of the state’s consumer law. The Attorney General’s rules and the other chapters on sales are not confirmed either way, so the finding is an open question and not an absence.
A rule written for sales in general, if it reaches you, tests a proposal after the fact, through the claims a seller made and the way it made them. Without a confirmed checklist, the proposal is where you build your own.
As advice, build each proposal on some habits:
- State how the output estimate was produced and what it assumes about shading, orientation and equipment, so a shortfall can be traced to a stated assumption rather than to a vague promise.
- List every cost the customer will bear, including any that arrive after installation, and describe in plain words what your business does and what the customer or another party does.
- Keep a signed copy of whatever the customer received, and a dated note of any verbal claim a salesperson made at the door or on the phone.
- Train the sales team to say what it does not know. A salesperson who answers a legal question from memory has made a claim the business must stand behind.
If a customer relies on an estimate that turns out wrong and nothing is damaged, the claim that follows is a professional liability question rather than a general liability claim. Nothing here describes a New Hampshire rule about solar sales; the finding is only that such a rule is not confirmed.
A building code adopted by statute that reaches every building and structure
New Hampshire adopts the National Electrical Code statewide by statute, as part of the state building code under RSA 155-A, and requires every building and structure built in the state to comply with it.
Solar wiring on a New Hampshire building is built to the adopted edition of the National Electrical Code, with the town, city or county building official issuing permits and inspecting, and the state fire marshal serving where a municipality has no enforcement mechanism.
Authority: RSA 155-A:1, IV; RSA 155-A:2
The adoption sits in the statute’s definition of the state building code. The definition lists the model codes it takes in, and for the electrical code it reads:
“and the National Electrical Code 2023, as published by the National Fire Protection Association, Inc.”
The same sentence ties the adoption to the amendments the review board has approved, as the legislature ratified them:
“including all amendments reviewed and approved by the board as of October 10, 2025, and ratified by the legislature in accordance with RSA 155-A:10”
The state building code review board reviews and recommends the codes the state building code adopts, including the National Electrical Code. The section that applies the code says what it reaches:
“All buildings, building components, and structures constructed in New Hampshire shall comply with the state building code and state fire code.”
Read that as a statement of reach. The quote draws no line by occupancy or building type around the installations the code reaches, so the wiring on a solar array is built to the adopted code like any other electrical work on a building in the state.
Who issues permits is a separate matter, and the statute handles it separately:
“Except for buildings owned by the state, the community college system of New Hampshire, or the university system, the issuance of permits and certificates of occupancy pursuant to the state building code is expressly reserved for counties, towns, cities, and village districts.”
Those words allocate enforcement. They say that counties, towns, cities and village districts issue permits and certificates of occupancy, with an exception for particular owners, and they are not a limit on which installations the code reaches. For the buildings in that exception and for municipalities without an enforcement mechanism, the state fire marshal issues permits and inspects state-owned buildings and serves municipalities without an enforcement mechanism.
The statute also limits a slice of the electrical code. It reads:
“any provision of the National Electrical Code, which requires arc-fault circuit interrupter protection in excess of the requirements of the 2014 National Electrical Code shall not be enforced under the state building code or this chapter.”
That passage is about arc-fault circuit interrupter protection and nothing else in the code. Whether the review board’s amendments touch the photovoltaic article is not confirmed on this page, so this page does not say the article applies as printed or as changed. As advice, make sure each crew lead knows which edition the inspector is reading from, and ask the permitting office in the town or city where the array goes up how it wants the application filed, because a design that leans on a provision the inspector does not apply can fail inspection.
Keep the drawings, the equipment listings and the inspector’s sign-off together. How a liability policy treats a wiring fault that comes to light after the job is finished is explained on the general liability page.
Workers’ compensation with a licensed insurer or proof of direct payment
Workers’ compensation in New Hampshire is compulsory for employers its law covers. An employer secures it by insuring with a company licensed to write the coverage in the state or by proving to the labor commissioner that it can pay compensation directly. There is no state fund that insures employers.
A solar contractor with employees carries a workers’ compensation policy from a licensed insurer and files evidence of it with the labor commissioner, or qualifies to pay compensation directly.
Authority: RSA 281-A:5; RSA 281-A:5-a
The security section opens with the duty and then lists the ways to meet it:
“An employer, or group or association of homogeneous employers, subject to this chapter shall secure compensation to employees in one of the following ways:”
The section’s insurer route is the purchase of a policy on the open market. An employer may meet the duty
“By insuring and keeping insured the payment of such compensation with a company licensed to write workers' compensation insurance in this state and filing with the commissioner, in a form prescribed by the commissioner, evidence of such coverage as the commissioner deems appropriate.”
and the statute gives it another route for the employer that can carry the burden itself:
“By furnishing to the commissioner satisfactory proof of financial ability to pay compensation directly to an employee when due in the amounts and manner as provided in this chapter.”
These routes run through the commissioner of labor, which receives evidence of workers’ compensation coverage and proof of financial ability to pay compensation directly. Neither route is a state fund. The insurer is a company licensed to write the coverage in the state, chosen in the private market, and the alternative is the employer’s own proven ability to pay.
For a solar business with a crew, that leaves a direct path. The policy is placed with a licensed insurer and evidence of it is filed, unless the business qualifies to pay compensation directly. How roof crews, ground crews and service technicians are classified, how subcontractors are treated at audit and how a policy follows a crew that travels are policy questions rather than New Hampshire questions, set out on the workers’ compensation page.
As advice, settle before the season who on each job is an employee, and collect a certificate of coverage from every subcontractor before its people set foot on an array. Nothing on this page reaches past New Hampshire’s border; for a job in a neighboring state, check that state’s rules before the crew leaves the yard.
Funds that pay benefits, and a risk-sharing plan for employers the market turns away
A reader who sees the words fund and workers’ compensation together may expect a state insurer. None of the ways of securing compensation described above is a state fund, and the funds the chapter does create sit in the state treasury and pay particular benefits or the costs of administering the chapter. None of them issues a policy. A passage on the special fund reads:
“A special fund is hereby established in the state treasury for the purpose of making payments in accordance with RSA 281-A:15, III, RSA 281-A:54 and this section.”
That passage establishes a fund for making payments, and the attribution on the quote says what it pays for. It is not a place an employer buys coverage, and this page does not treat it as such.
An employer that cannot find a policy has another path. The commissioner of insurance adopts or approves the risk-sharing plans that make up the residual market. It is a risk-sharing plan, described here by function only, and it is a fallback for employers who have been turned away, not a starting point. As advice, ask your agent early, before the crew is on the payroll, whether the business is likely to need it and what the plan would expect, so the answer does not arrive on the day the job starts.
The chapter also has a section that lets a private employer, or a group or association of homogeneous employers, self-insure, subject to the direct-payment route quoted above, with loss reserves and excess insurance. That is a decision for a business with real financial depth.
New Hampshire’s record names an electricians’ board and a commissioner of labor. OSHA, in its Fall Prevention Campaign, tells employers who work from heights to decide the method and the safety equipment before the job starts.
Where each statute sends you: the New Hampshire offices behind the findings
The public bodies behind this page each hold a separate part of the picture. Each link goes to the statute page that carries the body’s role, and each role is given in the statute’s terms:
- office of professional licensure and certification: issues the statewide electrician license
- electricians’ board: the board under the electricians chapter whose rules govern the license
- state building code review board: reviews and recommends the codes the state building code adopts, including the National Electrical Code
- state fire marshal: issues permits and inspects state-owned buildings and serves municipalities without an enforcement mechanism
- commissioner of labor: receives evidence of workers’ compensation coverage and proof of financial ability to pay compensation directly
- commissioner of insurance: adopts or approves the risk-sharing plans that make up the residual market
Any agency that sells you a policy, ours among them, can be looked up on NIPR.com. Because the statute leaves the choice between a licensed insurer and direct payment to the employer, the license check applies to whichever agency places your workers’ compensation along with the rest of the program.
In an ordinary week the offices you meet depend on the stage of the job: the licensing office for the wiring crew, the building official in the town or city where the array goes up for the permit and the inspection, and the labor commissioner for the proof of coverage.
Metro areas with New Hampshire counties, and a market that crosses the border
The cards below show the metropolitan areas that include New Hampshire counties, as the U.S. Census Bureau delineates them, with a principal city in New Hampshire listed ahead of the cross-border market, and the New Hampshire counties inside each.
Manchester-Nashua, NH
Made up of Hillsborough County.
Boston-Cambridge-Newton, MA-NH
Part of this metro lies outside New Hampshire; this card lists its New Hampshire counties only: Rockingham County and Strafford County.
The electrician license, the building code and the comp duty are statewide, so a metro line adds only its counties. Permits are issued locally, so the town or city where the array goes up decides how the application is filed. As advice, log the county and the municipality for every job you price, check the permitting office there before the proposal leaves your hands, and do not assume that a filing that worked in a metro’s principal city works the same way in the next town.
Coverage lines to read against the New Hampshire findings
The findings above say where New Hampshire’s rules sit and where they are not confirmed. The policies that answer for the work are the ones a solar business carries wherever it works, and each has its own page:
- The electrician license and the electricians you bring in point to general liability, which also takes up finished wiring and damage to the roof or building under the array.
- Estimates and designs a customer relied on, in a state where a solar sales rulebook is not confirmed, point to professional liability.
- The duty to secure compensation with a licensed insurer or by direct payment points to workers’ compensation.
- Trucks and trailers that carry modules and racking between the yard and the job point to commercial auto.
- Meters, lifts and stock on the way to a job point to tools and equipment.
- Contracts that ask for limits above the primary layer point to umbrella liability.
Which of those weigh heaviest depends on the work, and the pages on rooftop installation, panel cleaning and maintenance and ground-mount and solar farm construction take each kind of work on its own terms. When you are ready to put the pieces together for New Hampshire jobs, a quote request is the place to start.
State rules decide who may do the work and how; the policies decide who pays when something goes wrong.
- A license, registration or certification is a requirement of the state, not insurance.
- Solar sales and installer rules is not confirmed at the state level on this page.
A panel for New Hampshire in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. License to install: A state electrician license exists; the text read names no solar work. It leaves open damage to the roof, the building or a neighbor’s property from the installation work, which General Liability answers. Solar sales and installer rules: Not confirmed at the state level. No connector is drawn for this row. Electrical code: The state adopts the National Electrical Code statewide. It leaves open a wiring or tie-in fault traced back to the work after the job is done, which General Liability answers. Workers’ compensation: Required for covered employers, bought in the open market. It leaves open a crew member hurt on the job, which Workers’ Compensation answers. Notes: A license, registration or certification is a requirement of the state, not insurance. Solar sales and installer rules is not confirmed at the state level on this page. The conclusion reads: State rules decide who may do the work and how; the policies decide who pays when something goes wrong. No figures are shown.
Nearby states we also write
New Hampshire coverage, services and state offices
What we insure
Coverage lines
New Hampshire solar contractor insurance questions
The licensing chapter never says solar. Does a New Hampshire electrician license still matter on an array?
The chapter requires a state license for electrical installations made for pay and defines the work by what it touches: conductors, fittings, devices and fixtures for heating, lighting or power purposes. It names no solar work, so this page cannot say that an array’s scope falls inside it or outside it. Ask the office of professional licensure and certification or the electricians’ board in writing, and file the reply with the job.
Does New Hampshire license general or home-improvement contractors, and would that reach a racking-only crew?
That is not confirmed at the state level, and this page does not say there is no such license. What is confirmed is the electrician license, which turns on the installation of electrical conductors and equipment. Before your crew sets racking on a customer’s roof, ask the office of professional licensure and certification what a contractor must hold beyond the electrical license, and keep the dated answer in the job file.
Is there a New Hampshire rulebook for solar sellers that our door-to-door team has to follow?
A solar-specific rulebook is not confirmed at the state level. The general consumer protection chapter contains no solar provision, but the Attorney General’s rules and the other chapters on sales are not confirmed either way, so absence is not the finding. Write each proposal for a skeptical reader: say how the output estimate was produced, list every cost and describe who does what.
The statute carves state-owned buildings out of local permits. Does the electrical code skip those buildings?
No. The statute applies the state building code to all buildings, building components and structures constructed in the state, and the carve-out concerns who issues permits, which is enforcement. The state fire marshal issues permits and inspects state-owned buildings and serves municipalities without an enforcement mechanism. For any other building, ask the permitting office in the town or city where the array goes up how it wants the application filed.
The statute limits arc-fault enforcement. Which code edition governs the panel work on an array?
The statute names the electrical code edition and the amendments it adopts in the passages quoted on this page, and it separately bars enforcing arc-fault circuit interrupter requirements beyond an earlier edition. Whether the review board’s amendments touch the photovoltaic article is not confirmed here, so ask the building official which provisions the inspector will apply before the drawings are final.
Nobody will quote our crew. Who writes workers’ compensation in New Hampshire when the open market says no?
An employer the market turns away has a residual market: the commissioner of insurance adopts or approves the risk-sharing plans that make up the residual market. It is a risk-sharing plan rather than a state fund, and this page describes it by function only. Ask your agent early, before the crew starts, what the plan would require, and compare that with the direct-payment route the statute also allows.
Could our company skip the policy and pay injured employees directly in New Hampshire?
The statute allows it for an employer that furnishes the commissioner of labor satisfactory proof of financial ability to pay compensation directly when due, and the chapter has a self-insurance section with loss reserves and excess insurance. A smaller solar business weighing that route should take the decision to the commissioner early, with the financial records the process will want.
What should I check about an agency before it places our New Hampshire solar program?
An insurance agency’s license, ours among them, can be looked up on NIPR.com. Check it before you sign, and ask how the agency will place your workers’ compensation, since the statute leaves the choice between a licensed insurer and direct payment to you. The commissioner of insurance adopts or approves the risk-sharing plans that make up the residual market.
This page describes insurance for solar contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, interconnection and code requirements change; verify current requirements with the agency named before relying on them.
Get a quote for your New Hampshire solar contracting business
Tell us who holds the electrician license behind your crew, which New Hampshire towns your arrays go up in and how your payroll is covered, and we will build the program from those answers.