Coverage Explained

Equipment Breakdown Insurance for Solar Installation Contractors

Equipment breakdown insurance, as commonly written, pays when equipment a business owns fails from the inside, through a mechanical or electrical breakdown. For a solar installation contractor that means shop, yard and office equipment, not the systems on customers’ roofs. The form decides what is covered.

Breakdown means the equipment failed from within

The plainest description comes from IRMI. Its definition of equipment breakdown insurance says the coverage is for loss due to the mechanical or electrical breakdown of nearly any type of equipment, that it applies to the cost to repair or replace the equipment and other property damaged by the breakdown, and that it is increasingly replacing traditional boiler and machinery insurance.

Read that as a description of cause. A motor burns out, a control board fails, a pressure vessel gives way, a power surge ruins a circuit. The loss starts inside the equipment, or in the electricity feeding it, and not with a fire, a thief or a fall from a truck.

That distinction explains most of what follows. Coverage for the cause of a loss and coverage for the thing that was lost are two separate questions, and a policy is built around both.

The equipment that can break down at a solar company

Think of the building and the yard, not the roof. A solar installation or maintenance company usually keeps a shop or a warehouse where the work is staged, and a yard where vehicles and materials wait.

Inside, there are air compressors, chargers and battery banks, power tools on a bench, test and bench equipment for inverters and controllers, a generator, heating and cooling units, lift and hoist gear, a server or a phone system, and office electronics. Each is a machine that can stop on a bad day.

A cleaning and maintenance outfit adds pumps, water-fed systems and reels. A ground-mount builder adds shop machinery and the trailers that carry it. None of these are on a customer’s roof, and none of them are what the company sells.

Make a list of what the business would struggle to replace or live without, and note which items are owned, which are leased and which belong to a landlord. The answers decide who has to insure what.

What the coverage leaves out

Breakdown coverage is narrow on purpose, and the neighbors do the rest. As commonly written, it is not any of these.

  • Wear and tear. Equipment that has simply aged out, or has gone without maintenance, is generally outside the idea.
  • A manufacturer’s warranty. A warranty is a promise from the maker. A policy is a contract with an insurer. They do not substitute for each other.
  • Fire, theft and weather. These belong to commercial property, and the commercial property section of our tools and equipment page explains where the shop fits.
  • Tools in transit and on jobsites. Tools and gear that travel are an inland marine question, handled in the same place.
  • A customer’s installed system. Equipment on someone else’s roof is not equipment in your shop.
  • Failure of the panels or inverters you install. That is a product and workmanship question. It points toward warranty terms, your contract, general liability and professional liability, and not toward this coverage.

Keeping the lines clear helps with a claim as much as it helps with a purchase. When a machine stops, the first job is to decide which question you are asking.

Income and extra expense when the machine is down

A breakdown costs more than the repair. If the machine that stops is the one that stages every job, the crews wait, the schedule slips and the customers notice. IRMI notes that resulting business income and extra expense loss is often covered under this coverage, which is why it is worth asking how the form handles both.

Business income is what the company would have earned. Extra expense is what it pays to keep going, such as renting a replacement or moving work to another site. Both come with conditions in the wording, and a waiting period before the coverage starts is common in property forms.

Our post on business interruption coverage walks through how those conditions read, and it is a useful companion here, because the same questions about cause, waiting periods and the period of restoration apply.

Real-World Scenario: A maintenance company keeps its pumps and test benches in a rented shop. The compressor that feeds the bench seizes on a Monday, and the crews cannot test the repaired inverters that customers are waiting for. The owner assumes the property policy will pay, then learns that the policy covers fire and theft and says little about a machine that fails by itself. A call to the broker turns into a question about whether breakdown coverage was added, whether it names the compressor and whether it pays for the days the shop is idle. The owner now keeps the list of equipment with the policy.

Where the coverage sits in the program

Equipment breakdown is usually added to a commercial property policy, or written with a package of coverages, though it can also stand alone. The Insurance Information Institute’s article on commercial package policies lists equipment breakdown among the coverages that can be added, which is a useful way to think about it: an addition you decide on, not a default.

State consumer guides describe the older name. The Texas Department of Insurance publishes a consumer guide to commercial property insurance that describes boiler and machinery coverage for boilers, air conditioning units, compressors and similar machinery. The California Department of Insurance has a commercial insurance guide with a section on boiler and machinery. They are examples of how regulators explain the subject, not statements that either state’s law applies to you.

Ask whether the coverage is in your quote, offered as an option or left out. A quote that does not mention it may not include it, so ask in writing.

Reading the form before you rely on it

Four parts of the wording decide most outcomes. The definition of a breakdown says what kind of failure counts. The description of covered equipment says what the policy will pay for, and some forms list categories while others describe equipment more broadly. The exclusions say what is left out. The conditions say how a loss is valued, whether the policy pays to repair or to replace, and what you must do after a loss.

Read the schedule of locations too. Equipment kept at an address the policy does not list may not be protected, and a company that moves its shop or rents a second yard should tell the broker. A policy describes a business as it was when the form was written.

Keep maintenance records for the larger machines. A breakdown claim invites questions about whether the equipment was serviced and whether the failure was sudden, and a simple log of inspections and repairs answers them. It also tells you which machines are near the end of their working life, so the replacement conversation can happen before the failure does.

Ask how the policy treats an item you lease or borrow, and whether a landlord’s equipment that you rely on, such as the building’s electrical service, is addressed. A breakdown at the building level can stop a shop as surely as one at the bench.

Questions for a broker

Bring a list instead of a general request. A licensed agent can only test coverage against the equipment and the operations you describe.

  • Is equipment breakdown in this quote, an option or excluded?
  • Which of our shop, yard and office equipment does the definition reach?
  • How does the policy value a loss, and does it pay to repair or to replace?
  • Are business income and extra expense included, and what waiting period applies?
  • How are leased items and the landlord’s equipment handled?
  • Does any customer contract, lease or lender ask us to carry it?

Tools that travel to jobs, rented lifts and staged materials belong to a different conversation, covered on the tools and equipment page. A rooftop installer and a cleaning and maintenance route will meet different equipment lists, and a farm builder will meet a larger one. We place solar contractors in the states where we are licensed, and the solar program page shows how the lines fit together. You can read who we are, then send your equipment list and current policies for a quote.

From a failed machine to the policy that answers

  1. What stopped working Company equipment, or a customer’s installed system?
  2. Why it stopped Internal failure, wear, or an outside event?
  3. Which policy is the likely home Breakdown, property, tools and equipment, or warranty
  4. What else stops with it Lost income and extra expense while it is down
  5. What the form says Covered equipment, exclusions and waiting periods
A solar contractor can sort a failure by asking what failed and why; the wording of each policy decides what applies.

A flow of questions from left to right. What stopped working: shop, yard or office equipment, or a system on a customer’s roof. Why it stopped: an internal mechanical or electrical failure, wear, or an outside event such as fire or theft. Which policy is the likely home: equipment breakdown, tools and equipment coverage, property, or a liability or warranty question. Then the income that stops while the equipment is down. No figures are shown.

Frequently asked questions

Is equipment breakdown the same as boiler and machinery insurance?

It is the newer name for the same idea. As commonly described, equipment breakdown insurance is replacing the older boiler and machinery coverage, and it applies to nearly any type of equipment that can fail mechanically or electrically, not only boilers. Policies still differ in wording and in what they list as covered equipment, so ask your broker how the form you are offered defines it.

Does it cover a failed inverter we installed on a customer’s roof?

No. Equipment breakdown, as commonly written, is about equipment the business owns and uses, such as shop machinery and office electronics. A system installed for a customer is a different question, handled through manufacturer warranties, the workmanship terms of your contract and the liability or professional policies. Tell your broker if you retain ownership of any system, since that changes the discussion.

Does it pay when equipment simply wears out?

Generally not. Wear and tear, gradual deterioration and routine maintenance are normally outside property-type coverage, and a breakdown form usually expects a sudden failure. A manufacturer’s warranty is also a separate arrangement. Ask the broker how the form treats a part that fails from age, and whether the policy responds to the resulting damage to other equipment.

Will it cover the income we lose while a machine is down?

It can. IRMI describes resulting business income and extra expense loss as often covered, but that depends on whether the coverage was added and how the form defines it. The waiting period, the amount and the conditions are all in the wording. Ask for the business income and extra expense terms in writing, and compare them with the business interruption coverage in your property policy.

Where do I get equipment breakdown coverage?

It is usually added to a commercial property policy or written with a package of coverages, though it can also be written separately. The Insurance Information Institute lists equipment breakdown among the coverages that can be added to a commercial package. Ask your broker whether it is included, offered as an option, or excluded from the quote in front of you.

Do our customers’ contracts ask for it?

Contracts more often ask for liability, workers’ compensation, auto and umbrella coverage than for equipment breakdown, but a contract can ask for anything, and a lender or landlord may ask about it for the shop. Read the insurance clause of each agreement and the lease for the building, and send them to your broker so the certificate matches the words.